Interested to Buy Any Domain ? << Click Here >> for more details...
what is a switchgear. what is its work & where it is used?
- 5 Answers
- 7022 Views
- I also Faced
- E-Mail Answers
Answer Posted / arslan dar
The term switchgear is used in association with the electric power system, or grid, substations and refers to the combination of electrical disconnects, fuses and/or circuit breakers used to isolate electrical equipment. Switchgear is used both to de-energize equipment to allow work to be done and to clear faults downstream.
| Is This Answer Correct ? | 1 Yes | 1 No |
Post New Answer View All Answers
How to calculate earth fault current for 6.6 KV , 50 HZ , 756 Amps , 3000 RPM , 0.8 PF generator
specify the inbuilt protections in DG
what is the purpose of bypass mode in energy lighting transformer?
aternator every parts and its working
I am getting above 60 V as open delta voltage against single phase unit ICT at tertiary delta formed and ICT getting trippped on NDR. ICT tested and found in order. PTs provided on tertiary are tested and in order. what may be the reason?
Differentiate between low pass, high pass and band pass filter?
What are the various types of BUSBAR Schemes? explain each
What determines the thickness of the lamination or stamping?
Why current shoots up in the secondary on the knee point voltage during saturation test of CT? How core saturation effects the secondary current (while the primary side is open)? What the logic behind this?
we have provided 30 nos. relay contacts in panel.I want to know how do we do the numbering for the relay contacts as per any applicable standards
For an induction motor wat is the loading/unloading cycle duration or interms of L/UL ratio/ percentage?
how can we calculate the ratio of caustic soda and water in lrs.
Where voltage are high and current to be interrupted is low the breaker preferred is:
how to calculate the loss tangent of electrical cables
why ups rating in kva? and why ups are in parellel?.why isolation transformer is used in ups?
