Answer Posted / k.prakashchandra

They are oil levels to be maintained for 30 and 35' temp
rise at full load.

Is a contactor (or master relay) required between incoming lines and a VFD? The question goes to safety. If a contactor were used before the VFD and an e-stop engaged then the motor will coast to a stop (i.e. VFD loses power) instead of stopping much faster if the VFD braking fucntion were used. It would make more sense to keep power on the VFD.

2246

---

What types of high speed CMOS circuits have you designed?

2188

---

In Electrical 'Single Line Diagram' cable nomenclature shows "2 X 1C X 630sq.mm to be provided for one incomer. The question is how many cable to be proved for one Incomer.

1818

---

Why mostly the HV side of transformer has Delta?

3275

---

will there be any problem by recovering slip from single phase induction motors?

1934

---

Explain few advantages of electric traction system?

1190

---

why we change the direction of winding in rotor ?how we make the north and south pole?

2092

---

difference between main metering kiosk and check metering kiosk

3048

---

While converting delta into star or star into delta ,the three values of resistances remains unchanged .Find out the value?Let In star R1=x;r2=x;R3=x On converting into delta,R12=x;R23=x;R31=x Find the value of x

1983

---

where rlc series ckt used?

2244

---

132/6.6𝚔𝚟 𝚝𝚛𝚊𝚗𝚜𝚏𝚘𝚛𝚖𝚎𝚛 𝚗𝚎𝚞𝚝𝚛𝚊𝚕 𝚑𝚊𝚜 𝚘𝚗𝚎 𝚎𝚊𝚛𝚝𝚑 𝚙𝚒𝚝 𝚍𝚎𝚍𝚒𝚌𝚊𝚝𝚎𝚍. 𝙸'𝚟𝚎 𝚊𝚗𝚘𝚝𝚑𝚎𝚛 𝚝𝚛𝚊𝚗𝚜𝚏𝚘𝚛𝚖𝚎𝚛 𝚘𝚏 6.6𝚔𝚟/415𝚟 𝚌𝚊𝚗 𝙸 𝚌𝚘𝚗𝚗𝚎𝚌𝚝 𝚗𝚎𝚞𝚝𝚛𝚊𝚕 𝚝𝚘 𝚜𝚊𝚖𝚎 𝚎𝚊𝚛𝚝𝚑 𝚙𝚒𝚝 𝚊𝚜 𝚘𝚏 13/6.𝚔𝚟 𝚝𝚛𝚊𝚗𝚜𝚏𝚘𝚛𝚖𝚎𝚛?? 𝙸𝚏 𝙽𝚘.. 𝚃𝚑𝚎𝚗 𝚠𝚑𝚢??

1019

---

What will be the voltage impact on secondary side of two transformers with different vector groups when both voltages are compared.

2056

---

Terminal blocks is used for segregate the connections... There is any principle for terminal block..?

2179

---

direction of tarbine& genrator

2133

---

describe the Tranformer testing procedure

1930

---