Interested to Buy Any Domain ? << Click Here >> for more details...
A 230V, 60W bulb when connected to 230v supply what current
and power will consume, if same bulb is connected to 200v
what purrent and power will consume?
- 3 Answers
- 8618 Views
- I also Faced
- E-Mail Answers
Answer Posted / adil anjum
I=P/V so it can be solve
| Is This Answer Correct ? | 5 Yes | 0 No |
Post New Answer View All Answers
How efficiency of thermal plant can be improved?
What is meant by sag?
Which material is used for the core of a transformer and why?
design a 3 bit synchronous and asynchronous counter using T- flipflop
How can I calculate ISF of current transformer?
With a phasor diagram show the effect of increasing the field current of a generator supplying a constant real power and connected to a grid system.
What is the difference between isolators and electrical circuit breakers? What is bus-bar?
What is the use of bundle conductors?
what is the purpose of silicon dropper used in battery charger?
TRAFO 1. WHY BREATHER IS USED. 2. WHY OIL GOES DOWN IN CONSERVATOR TANK. 3. WHY WE ARE TAKING OIL SAMPLE TAKING FROM BOTTOM OF TRANSFORMER. 4. HOW TO CHECK IR VALUE OF TRANSFORMER. 5. WHY OLTC HAVING BUCHHOLZ TRIP ONLY; WHY NO ALARM. 6. OFF LOAD TAP CHANGER OPERATION PROCEDURE. 7. TR. SHUTDOWN / ISOLATION PROCEDURE. 8. WHEN THREE TRS. IN PARALLEL, ONE TR. IS NOT SHARING THE LOAD – WHAT IS REASON AND WHAT YOU WILL DO. 9. WHY TR. HAS OLTC IN HV SIDE. 10. WHAT IS % IMPEDANCE. 11. WHY TR. RATING IN MVA. 12. WHAT IS VECTOR GROUP IN TR. 13. CONDITION FOR PARALLEL OPERATION OF TRS. 14. WHAT IS TERTIARY WINDING. WHERE IT WILL BE. 15. IF TR. TRIP ON BUCHHOLZ OR TAP CHANGER RELAY, WHAT YOU WILL DO. 16. DIFFERENCE BETWEEN OIL TEMP. AND WINDING TEMP. PROTECTION 17. HOW WINDING TEMP. IS MEASURED IN CAST RESIN TR. 18. DIFFERENT TYPES OF FAULTS IN TR. Trafo - Page-1 of 2 19. WHAT HAPPENS WHEN TR. CHARGED FROM LV. 20. WHAT WILL YOU DO IF MEGGER READING SHOWS ZERO BETWEEN LV WINDING AND EARTH. 21. CAN WE INTERCHANGE BUCHHOLZ RELAY OF MAIN TANK AND OLTC TANK. 22. IF THE LINE BETWEEN BREATHER AND CONSERVATOR TANK 23. LOCKED, WHAT WILL HAPPEN DURING LOAD CYCLE. 24. WHAT IS THE FUNCTION OF OIL SEAL IN BREATHER. 25. WHAT ARE LOCATIONS FOR BUCHHOLZ RELAY FIXED IN POWER TR. 26. WHAT ARE CHECKS IN POWER TR. DURING MAINTENANCE. 27. WHAT IS IMPORTANT WHEN WE CHECK OLTC OPERATION DURING MAINTENANCE. Trafo - Page 2 of 2
how to setting Load amps tripping time and extra settings for load Transformer protection relay with RMU panel using C&S model relay..?
Why are cables rated for 40 KA for 0.25 Sec fault current rating?
what's the exact magnitude of current, flows through Neutral?
Can I use star delta connected induction motor for dual supply voltage?
what is the voltage between earth & neutral in 3 phase electrical connection.
