Interested to Buy Any Domain ? << Click Here >> for more details...
How can we get
electric power
from lighting ?
- 3 Answers
- 5794 Views
- TATA, I also Faced
- E-Mail Answers
Answer Posted / krishnamoorthy.i
We can get power from lighting using Solar energy.
| Is This Answer Correct ? | 4 Yes | 12 No |
Post New Answer View All Answers
What is the maximum breakdown voltage of 11KVA and 66 KVA power line and how it is calculated?
1.what is the difference between ct and cvt? 2.what is the difference between pt and cvt? 3.what is the difference between relays and circuit breakers?
How to set the relay,,??
what transformer we used normally and upto which kva?
what is the breaking capacity and making capacity of circuit breaker and how
what is residuel magnetism. and how order lead acid batteries for 24 volt. emergency lighting system.
What is the meaning of 40X8X2 busbar dimensions for carring load of 400 Amps
The loads are connected with phase and ground then why current flow as the loads ?
1. What is differential relay? How it operates? 2.How to calculate the Short Circuit Impedance in Transformer? 3.What is the alternate solution for testing of polarity by using polarity tester while its milli ammeter does not works? 4. While testing the 33KV Busbar by using Hipot kit, what should be the test voltage we have to apply? 5. What is the procedure/activities to be taken to inject the current more than 2000A by using 2000A Loading Transformer? 6. Explain how you can give the overload setting to any Motor Protection Relay for a HT motors with formula and example? 7. Why restricted earth fault protection is needed? Why can’t differential Protection is sufficient? 8. What should be the minimum and maximum ohmic value for earthing? 9. Why DC Currents are not used in transformer? 10. What is the Frequency while we step up the voltage from 220V to 11KV? Is it possible? Explain it?
what is the excess air in furnace
How to address the servo drive for motor
What is the difference between solid grounding and impedance grounding?
Classify milling machines.
do anyone out there know where to find a compleete list on acronyms/abbreviations used in offshore electric engineering. MCB - Micro Circuit Breaker, MCCB-Mouldes Case Circuit Breaker, ELCB-Earth Lekage Circuit Breaker, ELMCB- etc.....
what is mean by transition resistance of transformer?
