Interested to Buy Any Domain ? << Click Here >> for more details...
What is the difference between rich gas and lean gas?
- 3 Answers
- 13852 Views
- I also Faced
- E-Mail Answers
Answer Posted / ashok
Rich gas has c1.c2.c3
Lean gas has only c1.c2
| Is This Answer Correct ? | 15 Yes | 7 No |
Post New Answer View All Answers
Why not come out analog output in ABB EL3020 when display show correct value
What is the differerence between hysterisis and linearity.
What is the use of single seated valve?
how to work static pressure sensore how to work dpt
what is function of switch, and how is it work, explain with difination
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
What is mean by analytical instrumentation?
KAlman filter code for two dimension?
Explain the working of an enraf level gauge.
Which is the best field foundation bus. ( FF ) Yokogawa, Honeywell or others ?
how many pulses are required by a ac induction servo motor of 4 poles with 50 Hz frequency to rotate by 1 degree?
We are using Rosemount 5400 series Radar Level Transmitters in all types of Sump Applications having oily water hdrocarbon petrochemical nature. What we are facing the problem frequently is that always getting reading frezzed at some value. If we do power recycling , sometimes it is working . then making same freezing problem. If anybody faced before such type of problem and also having solution , Please give the answer.
Galvanizing.
What is defferent betwen ESP &PCP PUMP .HOW IT IS WORK?
what is the difference between magnetic flow meter and mass flowmeter
