Interested to Buy Any Domain ? << Click Here >> for more details...
What are effect of radio system in DCS Distributed control
system ?
- 1 Answers
- 4436 Views
- Sabic, I also Faced
- E-Mail Answers
Answer Posted / bandar7772
No answer for me
| Is This Answer Correct ? | 2 Yes | 1 No |
Post New Answer View All Answers
1. A 380 / 220 V r.m.s. 3-phase 4-wire circuit carries loads of 8 + j8.1 ohm; 4 + j4.1 ohm; and 2 +j2.1 ohmin the three phases respectively. The length of the circuit is 100 m, and the resistivity of the phase conductors is 0.0005 Ω/m. The neutral conductor is of the same size as the phase conductors. a) Select a reference angle 0for the first phase. Then write down the three phase voltages in both polar format and complex number format. b) Make appropriate assumptions, and take temperature effects on resistance is insignificant. Calculate the currents in the three phases. (Note: Determine conductor resistance, and apply Kirchhoff’s Voltage Law) Based on the result, suggest a main switch rating for the circuit. c) Show your preferred direction of neutral current in a diagram, and then determine its value. (Note: Apply superposition principle, and Kirchhoff’s Current Law) Use its magnitude to show that in this circuit, the unbalanced load may increase the voltage drop in some of the phases. (Note: Also observe the common volt drip in neutral) State your assumptions, if there are any. d) Suddenly the neutral wire of the circuit is broken. Estimate the new currents in the first phase, i.e. Phase L1. State your assumptions, if there are any.
Define what is power quality meter ?
Witch do depand of Power factor and theory of power factor?
what is the use of sdf?
WHY THE RATINGS OF THE TRANSFORMER IS 33KV WHY NOT OTHER???
I have 2 KW electric water heater.I am gonna use it in controlling water temp.so I needed to increase or decrease the heating capacity.is there any electrical-electronic circuit for varying the resistance & so current?
mccb service sittings be done?
How we can defined theecopper cable size if we know the aluminium cable size?
What happen if 200 KVAR capacitor connected to power continuesly?
What is the fault or needs to be done when frequency in ac drives is not changing?
What kinds of decision are made about CT from it's Knee point(voltage & current)?
should %impedance be high or low in a power transformer? if so why?
what is the disadvantages of common earthing for AC and DC equipment? (i am talking about inverter control room and inverter duty transformer earthing is common...?)
What is the permissable nutral current of three phase system as per IS standards?
if we run a 3 phase machine on two phase what will happend??? given answer with solid reason please
