Interested to Buy Any Domain ? << Click Here >> for more details...
in 132 kv transformer , in which range of transformer oil
bdv required ? if it has around 50-55 , then how it was
insulated the winding ?
- 3 Answers
- 13042 Views
- Voltamp, I also Faced
- E-Mail Answers
Answer Posted / raj
It should be more than 50kv and this value we got from
voltage applied inbetween 2.5mm gap with bare conductor.In
transformer no bare conductor (conductor with insulation)
and no so much less gap.
| Is This Answer Correct ? | 6 Yes | 0 No |
Post New Answer View All Answers
why swinburnes test cannot be performed on series machines?explain
i have attended the interview on 4th June,08 at Kolkata in IOCL, can anybody tell me what is its result
Give details of your interested designation, the post you are interested to serve the company better and explain why you think you can serve the company better in such position if employed?
how much UPS neutral erath leakage current.
What does ampere turns shows?
how to find the multiplication factor for digital energy meter and analog energy meter
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
how we can calculate the efficiency of a diesel generator ?
there is an alternator 480 k.w, 400v,50hz, 4-wire running on load having leakage alternator body earthed current 38 A. is it within acceptable limit? if yes then give reference if no then how to bring within specified limit
What is the vector group of a transformer,how can it be found out?
What type of pipe material G.I or M.S is used for sprinkler system?
how to check ac servo motor
why the arc welding machines require parallel earthing systems? ie why each machines are connected to earth pit by separate wires during earthing? wats it adavantages?
we are having 110 Kv,250mA Electrostatic precipitators for coal fired boilers. what will be static voltage and current after discharge and what time it will remain before earthing?
A 11KV, 1200 A breaker combination fixed in a cubicle for HT motor.Is normally for 11 KV motor fuse is using? if Yes, What range fuse is required?
