Interested to Buy Any Domain ? << Click Here >> for more details...
y r manufacturing fan is running into clockwise direction?y
they can made in anticlock direction?pls give rply/
venkat.gattupalli@gmail.com pls send to my mail....
- 1 Answers
- 3698 Views
- I also Faced
- E-Mail Answers
Answer Posted / k.prakashchandra
They can made to rotate in anti clock direction if the wings
are reshaped to blow the air. Originally the ceiling fans
were made to rotate in Ac direction only to suck the hot air
from fire place,when they were introduced in India by
Britishers.The direction was changed for cooling purpose
instead of circulating hot air.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
why we use two slope(differential & restraining) in differential relay.but in busbar protection differential we are using only one slope?please explain
What is the formula for calculating the Instantaneous Short Circuit & overcurrent for any breaker
In a tap changing transformer where is the tap connected, is it connected in the primary side or secondary side?
how the characterstics of control valve being done
If a rotary UPS is in line through grid power; What would be the impact on Power Factor if the load through rotary ups is 25% , 50% , 75% & 100%. Will the power factor reduce with less load?
what is the role and fuction of automatic transfer switch in rotary ups
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
im electrical engineer, could any one help me for FEWA exam questions please ?
Can we put 3 layers of cable tray while installing tray
how to identify conection leads of an unknown electric motor
we all know voltage is a force(emf), and the force always devides if 2 or more than2 loads are there but why does the voltage remains same is parallel, it must devide na ???
which type of motor is used in automatic swing gate
if we look on phasor of the transformer vaoltage is 180 oppsite at primary and the secondary so to improve a power factor is secondary should kept negative to improve it primary side means is -.90 became +.90 at other side
What is critical disruptive voltage?
if grounding is notdone at regular intervals for long distance transmission, will the load connected at distribution end receive voltage during negativehalf cycle of the sine wave?
