Answer Posted / dinesh giri
Actully Transformer has any no its power factor.Its power
factor depends on the connected Load with it.The connected
load may be inductive or capactive or resistive Load or
mixed of all .
Connected Load rating in KW
As KVA*Power Factor(COS A)=KW
Rating of Transfarmaer is always taken in KVA
| Is This Answer Correct ? | 4 Yes | 2 No |
Post New Answer View All Answers
What is the difference between a Root Locus plot and a Bode plot?
Do you know what is dry-out test in x'mer
why i can not use thimble on capacitor duty contactor
If rotor works in clock wise what happens
Load break swicth maintenance procedure.
How to dimensioning SDCCH, LAPD and CS7 signaling on GSM?
can anyone explain 11kV 3core cable megger,hi pot test procedure with connection details?
Define gain margin?
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
what is transient enclosure vltage , very fast transients, very fast transient over voltages
What are the necessary solutions needed to be carried out on a malfunctioned earthing mechanism of a VACUUM CIRCUIT BREAKER.(TAMCO)
Explain the following and how these are working with PLC Unit 1 I/O Module Card 2 Adaptor Card 3 Ribbon Adaptor 4 I/O bus 5 I/O Devices
What will be the fault current of any system when its generation is 10% of BASE generation( FUll Load )?Will is 10% or the same as full base calculation?
what are the applications of transistors with low dc gain, high dc gain and medium dc gain( beta)?
-What should be minimum value of insulation resistance and maximum value of earth resistance at any electrical instillation and what is method of testing the same.
