Interested to Buy Any Domain ? << Click Here >> for more details...
Which one is process and why?( evaporation, vaporization,
reactor, fluid flow)
- 5 Answers
- 7461 Views
- I also Faced
- E-Mail Answers
Answer Posted / yash
reactor is the process where chemical changes take place
while all others are physical operations.
| Is This Answer Correct ? | 35 Yes | 3 No |
Post New Answer View All Answers
We are having proplem with the persperation smell in ETT/ECHO room in our cardiac hospital.The 2 Ton of AC is not conditioning the environment. We have to use exhaust fan to through out of the room bad air. Could anyone suggest how to coup with this effectively using chemical engineering. Any permanent solution to neutralise the bad smell.The Air freshners are not doing enough instead making a bad odour.
Is there any way to slow coke formation in ethylene furnaces?
Explain under what circumstances are vortex flowmeters the most accurate?
How much water is lost through a commercial cooling tower system with a throughput of about 600 gpm?
What is a cstr and what are its basic assumptions?
white rust formation over zinc plated and yellow passivated fasteners during CED painting. WHY?
What is some common piping materials used to transport slurries?
MY generator water cooler inlet line height - 11 mtr inlet water line height - 7 mtr water come into the line from overhead tank, O/H tank height - 20 mtr the first tapping in the inlet line is 2" line which down to 4 mtr level plateform., second tapping in inlet water line goes to a pump 6" line installed at 4 mtr level plateform, pump capacity 200m3/hr, head- 30 mtr, hp-40. the outlet of pump of 6" water line connected to a header of 6 mtr long of 6" line, on this header the six tapping are connected, 4 nos. 3" line goes to 11 mtr height water cooler the pressure of the line is 0.15 to 0.25 kg/cm2, 2" and 4" pipe line connected to a cooler at 4 mtrlevel plateform. my question is, at 11 mtr height level the quantity of water and flow is not sufficient for my cooler, the temp. of cooler is rises much more. you are requested to suggest the modification of pipe line/ pump for take more water flow and pressure (desired pressure is 1 kg/cm2)
Is there a rule of thumb to estimate the footprint of a cooling tower during design phase?
Explain the factors involved in designing kettle type reboiler?
Dielectric materials in static fields
Explain the strategies acquired to cure tube vibration and exchangers in a shell?
In case of welded vessels why is stress relieving in the form of post-weld treatment necessary?
What are the frequently asked technical questions in chemical engineering during PI?
What are the main terms in unit operations? What are its characteristics?
