Answer Posted / kesava reddy .g
Normmally PLC is Programmable logic controller used to
automate the process / machines to reduce manual
interactions and to increase the productivity and quality.
| Is This Answer Correct ? | 12 Yes | 0 No |
Post New Answer View All Answers
why we should maintain neutral earth voltage below 1V while calibration? why cant it be 1.2V or 2V
HOW TO SOLVE PROBLEM WITH ENRAF LEVEL TRANSMITTER 854 ATG THAT PASSWARD DO NOT Exist INTO TRANSMITTER TO ADJUST LEVEL WITH PORTABLE PET 847, WRITTEN WRONG PASSWORD , I AM SURE THAT DEFAULT PASSWARD (W2=ENRAF2) IS THIS TRANSMITTER NEED TO REPLACE SOFTWARE AND HOW?
In dcs panel we are using diff type of modules ?what is module ? what is the use of modules ?diff type of module?
what is a good line as ic engineer as maintenance ,oc, project, calibration ,validation engineer?
What is Alpha & Beta fctors related to Orifice Plate & its relation with flow?
Galvanizing.
Yokogawa CENTUMVP R6.09 unable to download to Engineering Station with ExaOPC R3.75
The issue is when I try to download the common project section to the Engineering Station (STN) from the HIS in System View, it is unable to connect. The error displayed is:
WARNING: Could not connect to equalize destination. (7001)
Retrying. Number of retries = 0/1
ERROR: LdXopsLoadMain: connect error 10060
ERROR: Processing terminated due to connection error. (7002)
Equalization end with errors. STN0149
---- ERROR = 2 WARNING = 1 ----
Background:
>Updated the ExaOPC software on the STN from 3.60 to 3.75
>STN operating system is Windows Server 2008 R2
>HIS operating system is Windows Server 2016 Stanard
Solutions attempted include:
>Ensuring all IP addresses are correct and all networked devices can be pinged.
>The ability to ping a device using its host name from another device (
Why flow/pressure transmitter before control valve?
How does temperature bath work? How does coil gets heated only by applying some current?
In Safe Guarding test what means by "Failed to Danger" ?
How to regulate the flow of Air in 4" line, with max flow of 330 nm3/hr and Pressure of 0.5 bar? please suggest the type of instrument required.
Questions on flow meters,few questions on HART protocol,
selection of the zener barrier for the hazardeous area zone 0
What happen if I install my pressure transmitter below the elevation of pipe in natural gas service?
what is installation and commissioning of (fat & sat) of power plant dcs ? this question keeps in desirable conditions of one company .