Interested to Buy Any Domain ? << Click Here >> for more details...
If i have two 3000 kW motors and the whole facility requires
a 10 MVA transformer.
What would be better installing two 5 MVA transformers(one
for 1 motor ) or just a single 10 MVA transformer for both
of them.
Give reasons for your answer.
- 4 Answers
- 6146 Views
- I also Faced
- E-Mail Answers
Answer Posted / k.prakashchandra
It is better to have 2x5 MVA.If one of them fails or
maintenance work is to be taken up ,you can use one of the
motors.
| Is This Answer Correct ? | 1 Yes | 2 No |
Post New Answer View All Answers
How to calculate no of Lighning arrestors are required for protecting 50mX 50m*20m cubical building and locations of LA?
Is there any rule to select the voltage of motor based on KW rating? What is the rating above which lt motor becomes the HT motor?.
State the factors, for the choice of electrical system for an aero turbine.
11KV AND 22KV NETWORK KW CAPACITY IN RING AND RADIAL?
in a solar power plant,we are going to step up the voltage 350V to 33kv, and to 132kv GSS. i want to ask that if it is possible that 315v/33kv is not possible because we also use 315v/11kv. or it should be 415v/33kv? is it effects generation or losses? the second question is-generation is depends on LV winding? or LV winding design for generation voltage?
When calculating the speed of a rotor required for a particular frequency of synchronous generator we use the equation 60f/p Is this p is the number of pole pairs of rotor & do we consider the number of pole pairs in the stator is 1?
How to select a transformer group to connect a 0,433 KV generation with 33 KV grid in bi directional flow of current
why ten delta testing is carried out on power transformer
how many electricity poles are there and what are the names and their sizes.
What is the efficiency during maximum power transfer?
What is the relation between frequency and motor rpm?
if i get a drop in my 1st year and the i clear my 2nd year and 3rd year all clear and i dont have any back logs so can i be able to sit in campus selection??
There are a trformer and an induction machine. Those two have the same supply. For which device the load current will be maximum? And why?
there is an alternator 480 k.w, 400v,50hz, 4-wire running on load having leakage alternator body earthed current 38 A. is it within acceptable limit? if yes then give reference if no then how to bring within specified limit
Why can't we parallel Voltage transformer secondary circuits?
