Interested to Buy Any Domain ? << Click Here >> for more details...
What different between kw and kva.
why maser AC in kva.
- 3 Answers
- 5447 Views
- I also Faced
- E-Mail Answers
Answer Posted / vinod
KW is the actual converted power from the used electrical
power.
KVA is the apparant power ie. the product of voltage and
current.in the presence of power factor the KVA value limit
the use of power equipments. for low pf the machine will be
over loaded for rated out put KW.
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
How cable from Kit-Kat to main switch, from starter to motor are designed?
how to select electronic timer(Star-Delta) setting for diff. rating motors
explain the mode of metal iranafer in Co,welding
What happens to a line-frequency of high-frequency transformer when it is first energized/ re-energize?
How to use earthing on shipments.
what are the precuation should be taken ahen installing power transformer,circuit breaker,current & potential transformer
I want to know all basics of electrical engineering
If i have two 3000 kW motors and the whole facility requires a 10 MVA transformer. What would be better installing two 5 MVA transformers(one for 1 motor ) or just a single 10 MVA transformer for both of them. Give reasons for your answer.
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
Explain the different regions in frequency response?
What would cause a 240v choke that should give 110v out on a 16w lamp to gradually increase to 160v?
In Power cable specification what is U0/U and Um.
A TRANSFORMER 440/400V,DELTA/STAR CONNECTED.THE NEUTRAL CONNECTED WITH GROUND CABLE THAT IS DIRECTLY CONNECTED TO THE PANEL,FROM PANEL IT IS CONNECTED EARTH PIT.IS IT RIGHT? IF IT IS RIGHT LEAKAGE CURRENT AFFECTED.SECONDATY IS PROTECTED WITH EARTH LEAKAGE RELAY.
what are all the components required to assemble solar panel other than pv cell?
