Interested to Buy Any Domain ? << Click Here >> for more details...
Please tell me about surveying standard chain details.Thanks.
- 1 Answers
- 4075 Views
- I also Faced
- E-Mail Answers
Answer Posted / dalip kumar
20m , 30m chain are usely used, in which one link of chain is 20cms i.e. 20m chain contains 100 links including there both hadles.
| Is This Answer Correct ? | 7 Yes | 0 No |
Post New Answer View All Answers
What is the strongest bridge for a school contest?
the magnitude of the buoyant force can be determine by newtons law of viscosity archimidies principal principles of momemnt none
Which ratio use for cement selery???
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
if the nitrates more than 45mg/l in water lead to disease then what is it called
For the calculation of bearing pressure below the footing, to know whether it is below the safe bearing pressure of the soil, the unit of RCC below ground level to be taken is 25 KN/m3 or (25-15)KN/m3, where 25 is the unit weight of RCC and 15 is the unit weight of soil and whether the weight of backfilling to be taken?
100mm block work 64 bags of cement used 150mm block work 286 bags of cement used 200mm block work 20 bags of cement used patly work (M15) 293 bags of cement used mortar ratio is 1:5 how to calculate volume of sand in cum & no. of bags
Mention what are the composition of a landfill?
how to calculate load bearing column
Trapezoidal section footing calculation of Volume & its Area
Used Cement & Sand in 1 Square Meter or 1 Square Feet For Brick Work 0.115mm ? (1:4) (1:6)
What is structural frames or systems?
I HAVE APPLIED FOR 20TH UES ARMY. I WANTED TO KNOW WHEN WILL I RECEIVE CALL LETTER FOR THE SAME.
calculate the quantity of cement ,sand,bars and aggregate used for 28*4 ft with 4 inch (125mm) thick
contractor receive 100 MT steel.after compliting the work the contractor refund 90 MT steel.How reconsilation of steel done?
