Answer Posted / jaimin patel
ARGON AND NEON FILLED IN C.F.L.
Is This Answer Correct ? | 53 Yes | 39 No |
Post New Answer View All Answers
what is PWM in IGBT and how it works for drive.?
How to reduce -234126219.6403 MVAr generation and by what?
1. A 380 / 220 V r.m.s. 3-phase 4-wire circuit carries loads of 8 + j8.1 ohm; 4 + j4.1 ohm; and 2 +j2.1 ohmin the three phases respectively. The length of the circuit is 100 m, and the resistivity of the phase conductors is 0.0005 Ω/m. The neutral conductor is of the same size as the phase conductors. a) Select a reference angle 0for the first phase. Then write down the three phase voltages in both polar format and complex number format. b) Make appropriate assumptions, and take temperature effects on resistance is insignificant. Calculate the currents in the three phases. (Note: Determine conductor resistance, and apply Kirchhoff’s Voltage Law) Based on the result, suggest a main switch rating for the circuit. c) Show your preferred direction of neutral current in a diagram, and then determine its value. (Note: Apply superposition principle, and Kirchhoff’s Current Law) Use its magnitude to show that in this circuit, the unbalanced load may increase the voltage drop in some of the phases. (Note: Also observe the common volt drip in neutral) State your assumptions, if there are any. d) Suddenly the neutral wire of the circuit is broken. Estimate the new currents in the first phase, i.e. Phase L1. State your assumptions, if there are any.
Do u know any one? how to find out in motor rated amps? formula?
ht side line to earth voltage
Explain what is electric traction? Explain few advantages of electric traction system?
i want to learn control schedule for 11kv panel? can any one send the detailed control schedule?
A car's starter motor draws a current of 100 A at 12,0 V when starting the engine. The mechanical power required to turn the engine is 960 W. At what rate is energy from the battery converted to non-mechanical forms of energy?
what is capacitor voltage transformer?? how it is different from potential transformer?
can u give me a brief idea about power line carrier communication ??
What is capacitance?
how to work droop ct in generating station
What is difference between isolator and circuit breaker?
The series field winding has low resistance while the shunt field winding has high resistance. Why?
what is transient stability analysis means?