Interested to Buy Any Domain ? << Click Here >> for more details...
Can you tell me how we will select RTD and Thermocouples for
Temperature applications. I.e How we will choose accurate
one for a specefic operation if both having same ranges
- 3 Answers
- 8590 Views
- Nippon, I also Faced
- E-Mail Answers
Answer Posted / kumar_abit
Both thermocouples and RTD have their specific advantages,
according to our need we have to choose for our purpose.i am
explaining below:
1.thermocouples can measure up to a temp. of 1700 degree
celcius,where as RTDs are limited to 800 degree celcius
2.Grounded Thermocouples are inheritantly tip sensitive;
while RTD elements are isolated from their sheaths. A
grounded Thermocouple will respond to a 63% step change in
temperature nearly 3 times faster than a RTD counterpart.
3.Normally rtds are costlier i.e.2.5 or 3 times than
thermocouples
4.as the case is taken onbehalf of accuracy and linearity
RTD shows improve characteristics than thermocouple.
5.Due to their linearity and virtually drift free output,
RTDs are more stable than Thermocouples.
| Is This Answer Correct ? | 10 Yes | 1 No |
Post New Answer View All Answers
Difference between dcs and plc including date processing and architecture.
which type of filter gives the constant phase characteristics?
Where is wet leg is used?
Explain the working of rota meter.
while am calibrating Drager polytron 2IR flame gas detector occured non zero status.how can i get zero status?
what is the advantage of submersible level transmitter compare to ultrasonic level transmitter?
i have used level transmitter in starch cooking preparation tank. tank total height 2mtr.sometime LT display shows some error value when tank is fully empty and diaphragm side i already checked okay no problem in diaphragm area. field cable checked 24volt and mA shows correct value while tank empty mA is 4mA. 4mA i needed that 0% but display showing 10% or 15% percentage values are varying continously please give any good solution for me.....
what is 24vdc live and dry supply
What is the cascade control
What is surge and how is it prevented, what is the purpose of bypass valve across AS valve.
1.what is the effect of vapour presuure in orifice plate flow measurement 2.which is more effective 2 pressure sensors or one single differential pressure sensor in orifice plate measurement 3.how to design a v/i converter and i/v converter 4.how many type of thermocouple are there 5.how many leads are there in thermocouple measurement 6.how pressure sensors are connected in level measurement in differential pressure method 7.what is the output of capacitive pressure sensor (ac or dc),how its o/p is signal charactarized 8.what is the physical meaning of discharge coeeficient,why it is calculated,orifice plate what is its value,why it is less than 1,Q at upstream is equal to or not equal to Q at downstream of orifice plate why?what is vena contracta in orifice plate 9.why rotameter is called variable area flowmeter,it can measure flow even if area is not varying,why it is made tapered 10.design a 10 bit counter ,which counter you will prefer 11.how to remove self heating error in RTD 12.which is more sensitive pt100 or pt50 13.why thermocouple are connected in parallel 14.what is lead contact error in RTD,how to avoid 15.what is P,PI,PID,PD controller,why there is no ID controller 16.what is override,split range,sequential,ratio,feedforward,cascade controller 17.why we moved from SR to JK and then JK to master slave JK flipflop,give correct reason 18.how to measure level of a closed container which contains vapour and liquid,remember no vapour gas should be leaked,so ultrasonic and capacitive is not an option,design another method 19.how to design horse race counter including sensors and signal conditioning element 20.what is bevelling
draw the block diagram of a level transmitter ?
How works weighfeeders in cement industry? what is the working principle?
can you send remote seal interface level transmitter calculation steps for oil water saperator.
Identification of control valve parts.
