Interested to Buy Any Domain ? << Click Here >> for more details...
how much watts are equal to one unit of energy meter?
- 9 Answers
- 72516 Views
- I also Faced
- E-Mail Answers
Answer Posted / nikhil
friends....
Energy meter reads power which we use at our homes or
offices. When we switch on any electrical eqipments it
rotates faster or blinks faster. And unit of power is KW
Kilo Watt.
But energy meter reads KWH Kilo watt hour
3600*1000=3.6MW
Nikhil allahabad
| Is This Answer Correct ? | 21 Yes | 19 No |
Post New Answer View All Answers
What is the Resposiblity of Electrical Utility Engineer
What is VCB? where it is installed at SP. What is SP?
what are the values of VRY,VYB,VBR,Vry,Vyb,Vbr,Vrn,Vyn,Vbn for Magenetic balance test of 100 KVA and 63 KVA Distribution transformer
What is the difference between PS & metering CT (5p20,0.5 etc.)? Why in PS class CT only Vk is given ? Is PS class CT is more accurate than metering CT?
is it possible to start a motor in felid connected to a remote mcc
how to conduct dc resistance test for rotor of an alternator and how to measure the rotor dc resistance value theoritically?
Why frame of the motor is specified?. If we mention KW and voltage level,automatically frame is decided or separately frame is compulsory to mention?.
can some one clearly explain why -48 volt DC use in telecom site????
A powerplant has 8 gensets operating in grid parallel mode. In one genset sometimes there is pf variation and kvar variation. The plant operates in pf mode. When this variation is observed the load is stable, voltage is also stable, freq and genset speed is also stable. How will you check the functioning of pf card. What shall be the ideal output vdc of the pfc, from there it is input to AVR?
Explain bypass capacitor?
The Howland current source produces a A Unidirectional floating load current B Bidirectional single-ended load current C Unidirectional single-ended load current D Bidirectional floating load current
What is a diode?
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
Enlist four components of electrive drives.
How much pf maintan in dg set in 6o% load,when Dg runnig Neutaal Earthing removed what happen.
