Interested to Buy Any Domain ? << Click Here >> for more details...
which is heavier 1kg. of iron or 1kg. of cotton?and why?
- 33 Answers
- 110181 Views
- Getco, Jindal, Lloyd, Naval Academy, NDA, samr, swiggy, I also Faced
- E-Mail Answers
Answer Posted / raviteja nowduru
generally weight is product of mass*g
but mass=volume *density.iron is more densed,and cotton
occupies more volume .so both will get cancelled.so both
will have the same weight.
| Is This Answer Correct ? | 5 Yes | 9 No |
Post New Answer View All Answers
Greetings This question is about hydraulics and I request an expert to answer it. A simple hydraulic machine is made up of two heads, a larger one with a larger force inside a wider pipe and a smaller one with a smaller force inside a smaller pipe in width as in the second picture on this link: http://science.howstuffworks.com/hydraulic1.htm The question is this: what happens if the smaller head and the smaller force doesn’t exist but the smaller pipe is high enough to take all the liquid? For example the larger head is 1.00 sqr metre and can go down 1.00m under a weight of 100.00kg. The cross sectional area of the smaller pipe is 0.001 sqr metre. Now when the larger head goes down 1.00m, how high the liquid from the wider pipe can go into the smaller pipe of the cross sectional area of 0.001 sqr metre? Regards
"What do you going to observe, when a diesel engine is running?"
What are the protections in a Diesel generator Engine?
Which pipe should I use SAW, ERW or seamless if I have the following constraints I have to transport methane gas Size is 8” Corrosive environment Sulphide is present Also tell the cost comparison
Draw a crankshaft and show the parts?
In terms of electrical enhineering, give a detailed explanation of the "earth fault loop path"
DIFFERENCE BETWEEN CODES,STANDARDS & SPECIFIFCATIONS?
which purpose use in air intake system
What is the difference between conversion and enrichment ?
What do you understand by eutectic ?
How do you measure the moment of inertia?
i have an iterview on 18 sep for bhel ,pls send some questions asked during interview during the earlier interview on 11th sep
what is compression ratio? why its decreased when gear shifted ?
What is general pressure ratio for axial, reciprocating and centrifugal compressors?
Why RPM cum hour meter connection is not possible in water cooled DEA set. Is there any problem in sensing?
