Interested to Buy Any Domain ? << Click Here >> for more details...
What are the voltages at which electrical energy is
transmitted
- 7 Answers
- 10875 Views
- KSEB, I also Faced
- E-Mail Answers
Answer Posted / b.murali dhara babu
The voltage at which the utility is being trasmitted
depends on the load of the utlity .
From 200 w to 5 KW at 230 V single phase
From 5 KW to 55 KW/70 HP at 3 x 440 V
From 70 KVA to 1000KVA at 11 KV 3 Phase
from 1000 KVA to 5000KVA at 33 KV 3 phase
above 5000 KVA to 10000 KVA at 132 KV 3 Phase
above 10000 KVA at 220 KV 3 Phase
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
two phases with neutral supply can be taken in 3C X 10 sq.mm cable .
If there are two transformer having rating of 2.5mva, 6.6kv/440v(satr-star),and the load is 600kw then what is better to maintain less losses in transformer having both transformer in parellel or only single transformer connected to load? Please give calculated answer
How can i calculate the Breaking capacity of molded case circuit breaker, is the breaking capacity of CB for Diesel generator shall be less than grid supply's breaker ?
Why GRR starts from 60% of motor speed why not less than 60%?
will there be any problem by recovering slip from single phase induction motors?
if we install two earth pits with a clear space of 5m without any interconnection,by checking the digital multimeter will it show continuity between earth pits? If so what would be the approx. value
2. What are the parameters of EHT sub-station?
what is the formula for efficiency of francis turbine and generator for hydropower? what is best way to select francis turbine and generator?
HELLO SIR, IAM PREPARING HPCL EXAMS. SO PLS SEND MATERIAL OF HPCL ELECTRICAL ENG..TO VIJAY_8888@YMAIL.COM
Please help me regarding my one concern. - During earth pit testing we noticed that the Clean earth pit and dirty earth pit showing continuity (Resistance value - 5ohm) . I want to know that if both earth pit have separate location and there is not internal looping between PIT then why such continuity is showing on it . Because of this issue the field side all earthing point showing short. In PLC panel we are providing two types of earthing cable which is coming from separate earth pit (Clean and Dirty earth pit) because of earth PIT showing short our PLC is not complying spec . please help regarding this issues.
how to carry out Magnetizing Current Test on Distribution transformer and what purpose we are doing this test. why transformer rating in always in KVA ? what ispositive, negative, zero sequence impedence? How ElCB tripping if Neutral touch with ground Why AC & DC capacitor are use in UPS ? why motor rating in KW? how to syncronize two dg sets
In case of generator when we consume more power produces by it why load on generator increase and starts sound more. and how it is adjusted..
does a DG set has low fault level as compared to that of a transformer.If yes then why.
If we have to feed a housing complex having load 8MVA, than what would be the better option, either we first step down 33kv supply into 11kv & than 430v or we proposed no of 33/.44 kv transformer, also which option is economical?
why core is useful for a transformer ?and also in its operation ?
