Interested to Buy Any Domain ? << Click Here >> for more details...
why t/c is connected parallel and what is the purpose of it
- 2 Answers
- 6450 Views
- I also Faced
- E-Mail Answers
Answer Posted / u.nathan
bcoz output is voltage
| Is This Answer Correct ? | 3 Yes | 0 No |
Post New Answer View All Answers
detail of mass flow meter pricipal
which type of zones used for boiler? & why ?
Linear amplifier.
WHAT IS THE DIFF. BETWEEN SKIN TEMPERATURE AND PASSES TEMPERATURE..?
what is actual drum level and compensated drum level?
can anyone can let me know in Eurotron Micro cal 2+ calibrator in milli amps source mode we are not able to get 20 milli amps output it only produces 1.52 milli amps out, but display shows increase in milli amps , and err6 displays, let me know how to remove the err 6.
which processor is used in dcs.
Why we are using reverse action in displacer types level transmitters on some Vessels?
We Have Two Field bus Pressure Transmitters of Different Sensor Range (I.E One is of Lower range and Another is of Higher Range).Is same Process Line. My Question is Can i provide Saturation Limit to my field Bus Transmitter as We can provide Saturation current limit to HART Instruments. As During Low Pressure Both Working OK ,But During High Pressure, transmitter with Lower sensor range Goes to Fault mode as Beyond its Sensor Limit it can Measure, So may I provide Saturation point Some where to Suppress This Fault during High Pressure.
What is rang ability?
how we are selecting instuments by differentiating certain instruments in 4 to 20 ma range and certain in 1 to 5 v dc
Which are all the commonly used Bordon tubes in the pressure gauges. Do any one use ASTM A 312 tubes for this purpose?
what is IEC code in cables & how to selecting cables?
key exchanges in wpa,wpa2,tls
How is work 5/2 sov?
