how power can be saved using VFDs in detail explain
Answer Posted / sreedarsh
VfD. Variable frequency drives are used to control the speed of induction motors which is the driving force for 90% of the pumps in Industrial application. simply saying the are used to control the flow as per the requirements. the flow may be water, air or gas. A motor running at 50% of full speed capacity has a motor torque of 25% of full speed. In
addition, electricity required to operate the motor at 50% of full speed is 12.5% of the amount
of electricity required if the motor was running at 100% full speed capacity. Thus, reducing
motor speed can significantly reduce the electrical energy consumptio
Is This Answer Correct ? | 3 Yes | 1 No |
Post New Answer View All Answers
How to test Alternator stability test for REF relay
Why colled 440V to 3-phase supply.
In ACS 1000 drive we are using 12 pulse converter,why don't use 3 pulse converter.
In a power conditoining unit (inverter) of a solar plant when we measure the d.c. current fed by different strings of solar plates to inverter, the current in the negative wire is less almost by 1 ampere to the current in its positive wire say current in positive wire 5 A , then current in negative wire of the same string is 4 A. Since the current entering should be equal to current leaving then why the current is noticably less in negative wire.
What is the maximum and minimum rating of UPS?
why wire sizes are 3/29 or 7/29 and why not wire sizes are 2/29 or 6/29?
why are installed water leakage detection system data centers & server rooms
Can an inverter be used as a converter? How?
What is the differentional relay...what is the work of this in power Tx. how it is works..
what is a pulse transformer? how rise time of pulse changes when ever the voltage changes?
A 230V dc shunt wound motor has an armature resistance of 0,15Ω.When operating on no load at 650 rev/min the armature current is 6A . The motor takes a full load current of 85A. Calculate the full load speed if the field flux is (i) maintained constant (ii)reduced by 0,03
How to convert a two phase power into a three phase power in induction machine?
STATE WORKING OF VACCUM CIRCUIT BRAKER?
How to Design green buildings services? What is the advantage to design green building?
define reflection method?