Interested to Buy Any Domain ? << Click Here >> for more details...
what is the advantage of Cathodic eathing system and what
is the basic principle and how itis working, please explain
clearly .
- 2 Answers
- 4738 Views
- Meinhardt, I also Faced
- E-Mail Answers
Answer Posted / william lobo
cathodic protection systems are two types one is ICCP i.e.
Impressed Current Cathodic protection and the other is
sacrificial Anode Protection system.
Sacrificial anode ytpe cathodic protectionsystems provide
cathodic current by galvanic corrosion. The curent is
generated by metalically connecting the structure to be
protected to a metal/alloy that is electrochemically more
active than the material to be protected. (Both the
structure and the anode must be in contact with the
electrolyte.) Current discharges from the expendable anode,
to the electorlyte and onto the structrue to be protected.
Special backfill mateiral can also be used.
contact williamlobo@rediffmail.com for more details.
| Is This Answer Correct ? | 2 Yes | 1 No |
Post New Answer View All Answers
We are designer please help me calculate the size of 11kv cables from step up transformer to M.V panel, total load is 5 mega watt distance 900 feet (used aluminum type cables) please provided formula for calculate the cable with example.
What is the criteria for selecting the voltage classes of an AC Induction Motor.The KW rating above/below which ht/lt selection is made may be provided in details.
how can i use REF and diffrencial relay both in 1 CT core for transformer protection?
What is dc current source?
What are the types of the glands and difference between single and double compression type of cable Glands.
How to calculat the ratio of HT\LT in energy meter
What mean by MLTP
We have 110Vac ,10A ac supply which is converted into 110VDC & How much DC current? which factor is reqired for dc current calulation?
Logic using 1 kV or 1,1 kV grade in house wiring Low voltage cable. Explain/suggest? some use 1kV and some prefer 1.1kV grade insulation low voltage cable why??
how much maximum load a 2 core (Single phase) 16mm aluminium wire can take ?
generally in LT and MV motors we are using 3.5Coresx16,25,35,50 etc cable for supply.although motors is earthed at two point and having all protection.then why we are using that 1/2 core for earthing the motors.while in HT cable we are using only 3core cable for motor supply.generally lt and mv motors are delta connected and ht motors having star connection.whethere it is having any relation with winding connection( star or delta).all motors i am talking about are dol only.can anybody solve my confusion.thanks...
What is the effect on in Zone and out zone fault if Phase side CT is Vk/2<30 mA and Neutral side is CT is Vk/4<30 mA for Transformer REF protection
What is mean by hot and cold loop testing? What is the difference between them?
can anyone explain the star-delta motor control wiring ,which wire go where and how they operate?
What are the two basic types of transformers?
