Interested to Buy Any Domain ? << Click Here >> for more details...
What are the loading factors to be considered for
transformer sizing/selection?
- 3 Answers
- 6836 Views
- I also Faced
- E-Mail Answers
Answer Posted / omar aziz
1. Maximum Demand
2. Downstream equipment starting characteristics
3. Total downstream kVA
| Is This Answer Correct ? | 4 Yes | 0 No |
Post New Answer View All Answers
What is the reason that the humming sound is coming from the induction furnace panel?
300m long and 30kw inductive loade 3phase supply how many size cable required
if the motor rated speed is 950rpm. how to change the above rated speed? is it possible?
What are the types of windings according to the construction?
In our factory so many iron pillors are exists for supporting the shed/Hangar. If do more no of earthings at one piller instead of doing more earth pits in many locations and running earth strip around the hanger, I can save the money. Please suggest this method is acceptable as per Is specifications though the Earth resitance of the farthest piller is with in the limits as per IS specifications.
Why let through energy not considered for ACB breaker while cable sizing?
What is the need of earthing transformer for delta side of a transformer. (Think of a line section between a star/delta transformer at a grid substation and delta/star transformer at a village. An earthing transformer is there at the delta side of the star/delta transformer at grid substation). As there are no ground reference there will not be fault current if a one phase is grounded. Further L-L phase will be sensed by the primary side of star/delta transformer as a L-G fault. So why an earthing transformer is required at delta side
Explain advantages of storage batteries
what types of electrical & mechanical test conducted in switchyard?
What willbe change in programming when we use 5/3 solenoid inplace of 5/2 in operating of a cylinder?
Why increase in current leads to increase in conductor temperature?
how to calculate power consumption in slip ring motor at different step
why asa method ZPF method is more accurate than ASA method?
What are the two types of compensation?
my UPS suddenly goes off and all panel light also blow off.This happens even main electric supply is not interrupted.After some time it automatically starts functioning normally.Batteries are new.
