Interested to Buy Any Domain ? << Click Here >> for more details...
which generator is called as brushless excitation generator
and why??
- 3 Answers
- 9459 Views
- I also Faced
- E-Mail Answers
Answer Posted / elango k
self exicted generator is called brusless generator.
in this generator the rotor houses the field , where field
gets supply from small generator or permanent magnet
generator fixed in the rotor itself .when the rotor rotates
emf is build to exicte the field of main genrator. the
supply from the small generator is ac which is converted to
dc by diodes which is fixed in rotor this diodes is called
rotating diodes.
so there is no need for brushes to supply current or
collect current from field or armature.
so it is called self exicted brushless alternator
| Is This Answer Correct ? | 4 Yes | 2 No |
Post New Answer View All Answers
What we mean by vintage of an engine+Generator?
WHAT IS ELECTRICAL MAINTAINTENCE ?
In our factory so many iron pillors are exists for supporting the shed/Hangar. If do more no of earthings at one piller instead of doing more earth pits in many locations and running earth strip around the hanger, I can save the money. Please suggest this method is acceptable as per Is specifications though the Earth resitance of the farthest piller is with in the limits as per IS specifications.
In Electrical 'Single Line Diagram' cable nomenclature shows "2 X 1C X 630sq.mm to be provided for one incomer. The question is how many cable to be proved for one Incomer.
My question is whether bellow formula is correct to find bus size for 46kA for 0.5 second & what is RT in bellow formula. formula to calculate the size of busbar to withstand the thermal stresses due to currents with duration of 0.2 sec to 5 sec. Sp = RT( I x I x t) / K Where Sp – is the cross sectional area of bus bar in millimeters. I - is the value of AC fault current. t - is the operating time of disconnecting device in seconds. K – is the factor depending on the material of the conductor, insulation and initial and final temperature. Value of ‘k’ for copper is 143.
why booster transformer is used in sumpners test conducted on transformer????
Is it possible to make a 5P10/ CT Ratio 50/1A Burden 5VA
what is difference between earthingpits,earthing grid & earthing mess?
How to calculate approximate load loss of a distribution transformer by knowing %ge imp of transformer?
HOW WE KNOW IN PHYSICALLY THE CONTACT SURFACE OF A VACUUM INTERRUPTER IS GOOD OR GOING TO DAMAGE IN A VCB AFTER ABOVE 500 TIMES OPERATED.
What is the drawback of static coefficients?
what is ground fault in ACB?
What is excitation in case of dc motor?
grr resistance & contrator malt continuous
75 kw motor take 45 amp in no load delta in star 10 amp but in load it will take 160 amp but IR velue of winding above 500 at 1kw ph to earth and ph to ph. what problem it should be?
