Interested to Buy Any Domain ? << Click Here >> for more details...
what s a servo motor? how to control the servo motor? and
its application, purpose of using?
- 2 Answers
- 6120 Views
- Arabian Pipes, I also Faced
- E-Mail Answers
Answer Posted / vk
Servo Motors are generally used in the applications
involving precision Motion. Every mm is taken care of.
For example in the pick n place jobs.Servo Motors are
carefully manufactured so that the slip between rotor and
stator is zero.These are costly.Servo Motors are controlled
through Servo Drives. Speed,Acceleration,torque and
position are important parameters which are controlled by
the Servo Drive.
| Is This Answer Correct ? | 3 Yes | 1 No |
Post New Answer View All Answers
1.WHAT IS A SMART CAPABLE DB ( DISTRIBUTION BOX) ? 2. HOW TO DECIDE THE TYPE OF DB TO BE USED ( RECESSED/ PLUG TYPE/ SMART ETC ETC? 3. WHAT IS MILLENEUM BUS BAR USED IN DB? 4.DIFFERENTIATE MCCB AND MCB.
How to calculate earth wire load by formula
What is the difference between earthing,ground&nutral?
Can we use both Electrical & mechanical interlock between tow breakers? if yes how, please explain
how to calculate compresor capacity?
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
where can i get vijaya electricals limited in hyderabad interview auestions can u give me the website address plz
What will happen if the d.c. Shunt motor opened accidentally running on no-load has its shunt field winding?
I have one ct of ratio 3000-2000/1 Amp its knee point voltage mentioned on name plate is 500-333/30mA-50mA at Vk/2. in secondary box there is three terminal named 1S1, 1S2, 1S3 then on which terminal obtained the knee point voltage ie 1S1-1S2 OR 1S1-1S3 & also specify the knee point voltage for the ratio 3000 from name plate.
two way ckt diagram can be drawn by how many ways? give diagram
can i use 2000/5A Clamp meter to measure HT cable
What is the different between conventional MCC and intelligent MCC? Common controller or controller for each bucket
Define transfer function?
how to calculate regulation constants for over head lines? and what are the regulation constant for raccoon conductor at different voltage level and different P.F?
What is the principal of motor?
