Interested to Buy Any Domain ? << Click Here >> for more details...
what is the difference between power and distribution
transformer?
- 32 Answers
- 69758 Views
- L&T, VJTI, Wenke Electricals, I also Faced
- E-Mail Answers
Answer Posted / alok
Dear mr Shvetang Dave
u r saying for step up purpose from 750kv to 11kv .please clear my doubt
| Is This Answer Correct ? | 2 Yes | 3 No |
Post New Answer View All Answers
why the neutral line is not giving shock to us if we touch it ?
what is the use of expulsition protective gap in 11Kv line.
hi,every one, i have to write the search paper on "performance policy optimization" of NGN (next generation networks). i need the material on this topic. can any body help me. please tell me any useful site where the good material is available and name of any reference book. it should be a great help for me.
what is meant by neutral compensation factor and where it is used
1. A 380 / 220 V r.m.s. 3-phase 4-wire circuit carries loads of 8 + j8.1 ohm; 4 + j4.1 ohm; and 2 +j2.1 ohmin the three phases respectively. The length of the circuit is 100 m, and the resistivity of the phase conductors is 0.0005 Ω/m. The neutral conductor is of the same size as the phase conductors. a) Select a reference angle 0for the first phase. Then write down the three phase voltages in both polar format and complex number format. b) Make appropriate assumptions, and take temperature effects on resistance is insignificant. Calculate the currents in the three phases. (Note: Determine conductor resistance, and apply Kirchhoff’s Voltage Law) Based on the result, suggest a main switch rating for the circuit. c) Show your preferred direction of neutral current in a diagram, and then determine its value. (Note: Apply superposition principle, and Kirchhoff’s Current Law) Use its magnitude to show that in this circuit, the unbalanced load may increase the voltage drop in some of the phases. (Note: Also observe the common volt drip in neutral) State your assumptions, if there are any. d) Suddenly the neutral wire of the circuit is broken. Estimate the new currents in the first phase, i.e. Phase L1. State your assumptions, if there are any.
Is it required to use Automatic transfer Switch in L&T panel board if we use AMF panel with DG set? How the single line diagram will be? Please forward the material to sreenu_207@yahoo.co.in
Thermal withstand capability under full short circuit conditions, in terms of number of times of occurrence of short circuit and corresponding anticipated percentage reduction in transformer life.
can anybody sent me power grid questions. what subject should i prefer for preparation?
Name one of major transformer company in KSA ?
how to decide the panel size like MDB ,SMDB PANEL SIZES
How relay works, reverse relay, master relay, os relay, earth fault relay and what is its setting point
Why are short circuit ratings always 16kA,25kA,36kA and 50kA.Who has fixed these?
DG cranking voltage?
sir my exam is on 19/6/2013 under electrical branch pls send me sample aptitude questions as well as sample technical questions for jindal steel and power company
what is the soft starter principle? how is connection diagram? what is the procedure for checking the connection?
