HOW YOU CAN DETERMINE THE WEIGHT PER METER OF STEEL RODS
EASILY?
Answer Posted / gandhi.k
D^2/162
| Is This Answer Correct ? | 13 Yes | 1 No |
Post New Answer View All Answers
The building has 12 columns of 12x9 in 3 rows of 4 each in a plot of 50'x30', The central row is strengthened with 16mm twisted rods. The roof area is 1500 sft including balconies. calculate the load factor per sft. Also indicate the number of roofs the building can withstand.
Power grids in two adjacent states(A&B) are interconnected. Can power grid in state A can be represented by Thevenin Equivalent Circuit. If not explain Why?
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
how to caluclate sienerge qty in construction in ap
plumbing CPVC fitting FTE Brass full form
What are the composition of a landfill?
How can we make a hole in a solid rectangle using solidsworks?
What is the use of extruded feature in solidsworks?
What are the techniques to measure road difference?
How to calculate the cement consumption in RR Masonry in CM 1:8 for the foundation of Ground Level Reservoir
What are the responsibilities of a site manager?
asubmerged weir is one in which the water level on the down stream side of the weir is just at the crest level below the crest level above the crest level at stamp elevation as water surface on upstream
Define What is an ice dam sock?
I want to change job.If You have any vacancy please contact me in this mail id-parthamitra086@gmail.com.Myself partha mitra.Diploma in civil engineer with 4+ yrs. exp.Now in kolkata.If you confirm me then I will send my detail resume to you.Also send your mail id to me.My mail id is-parthamitra086@gmail.com.I will be very much thankful to you.
How much cement and sand are required for 1 square feet of plaster at a thickness of 15 mm at a ratio of 1:4?