Interested to Buy Any Domain ? << Click Here >> for more details...
Which system is best for industries 3ph 3w or 3ph 4w?
- 3 Answers
- 7067 Views
- I also Faced
- E-Mail Answers
Answer Posted / vaijanath nirgude
3ph 34wire
| Is This Answer Correct ? | 7 Yes | 3 No |
Post New Answer View All Answers
State the formula for overall efficiency of thermal power station
What is the resistance of the field winding of a d.c. Shunt generator kept low?
What is the main use of rotary phase converter ?
A well system is when , no. of bus bar is less or more. Tell me the concept of it.
temp of cast resin 1500kva tx formerwent up to 138.c but came down very fast to about 100.c within 20 mins when load was reduced from 70% to 60%
What are the basic elements used for modeling mechanical rotational system?
at meter room 50 hrc switch installed,but there are not get earthing proper,so what happen?and 11kv transformer out put going in to hrc main 400a three nog each? so earthing is require for all switch? (some customer made earthing at there home.)
What is control system?
what is the breaking capacity and making capacity of circuit breaker and how
whether starting current is limited to rated current of motor through soft starting or it exceeds the rated current?
How PADO software increase the efficiency of power plant?
why do you add the load short circuit impedance when considering short circuit amperage. It seems that you should only consider supply. If you need to consider loads and you don't know what loads are to be added , what would be a good sub-transient reactance rating for the loads?
What kind of socket shall be provided for window type air conditioner with cooling capacity upto 18000 BTU/hr
how can we understand that where we have to use ac or dc coil for solenoid valve and why?what is the different between coil of ac and dc explain please.
which are the criterias needed to select the kind of neutral earthing(solid earthing,resistance earthing,etc.) at various voltage levels in electrical distribution?
