what do you mean by CJC (cold junction compensation).?
- 5 Answers
- 13410 Views
- Jindal, I also Faced
- E-Mail Answers
Answer Posted / n.3vedi
CJC is that , we are making cold junction at 0 degree C by (any means) for measuring the perfect temp. of that hot body.
| Is This Answer Correct ? | 1 Yes | 3 No |
Post New Answer View All Answers
Why ac supply load cell is used? Can we use the dc supply load cell?
when placing a vent or drain hole on an orifice plate should you measure from the center of the bore up or down for the vent placement?
Describe how to use megger to measure the earth resistance and insulation resistance
give eg of how I/P is used in control loops
Introduce yourself which is not present in your biodata?
What pressure results for a flow transmitter of range 0- 180t/h in the dcs and 0-301mbar in the field using square root extraction. Kindly also suggest formulae for the percentages 0,25,50,75,100?
how works encoder in plc
Why humidity limit is 30 to 55 % for raw material storage?
how to calculate orifice sizing? and tell me if pipe size bet 50mm t0 200mm then we can use pipe flange??? and above 250mm pipe size should i use D & D/2 Flange? is it right or wrong?
I need to know steps to Calibration Valve Guard......
types of cable..? Use of every types of cable..?
can anyone can let me know in Eurotron Micro cal 2+ calibrator in milli amps source mode we are not able to get 20 milli amps output it only produces 1.52 milli amps out, but display shows increase in milli amps , and err6 displays, let me know how to remove the err 6.
What are primary elements of measuring pressure?
What is difference between differential pressure & delta pressure?
can any one tell me when ongc placement test and its forms is available????/ pls tell me if u know
