Interested to Buy Any Domain ? << Click Here >> for more details...
What is the difference between earth resistance and earth
electrode resistance?
- 1 Answers
- 11644 Views
- I also Faced
- E-Mail Answers
Answer Posted / sajib
Only one of the terminals is evident in the earth
resistance. In order to find the second terminal we should
recourse to its definition: Earth Resistance is the
resistance existing between the electrically accessible part
of a buried electrode and another point of the earth, which
is far away
The resistance of the electrode has the
following components:
(A) the resistance of the metal and that of the connection
to it.
(B) the contact resistance of the surrounding earth to the
electrode.
(C) the resistance in the surrounding earth to current flow
or earth
resistivity which is often the most significant factor.
| Is This Answer Correct ? | 8 Yes | 0 No |
Post New Answer View All Answers
How to know the Max. current caring capacity of the cable by its size ?
How do i perform grounding of star point of Genset (400V) for making connection with step up transformer of DELTA-DELTA (400V to 20KV) ? while Genset itself has its own neutral and grounding bus bar inside genset breaker box whereas we have another neutral and grounding busbar in synchronizing panel next to genset at maximum distance of 6meter, would someone pls advice if we can only perform neutral grounding in synchronizing panel or should we ground neutral on both places inside genset breaker box and synchronizing panel.
what is the min and max ohmic resistance for the earthing rod installed for lighting poles for street light network
where are the circulat the diesel in DG parts name with pictue
What is the difference between earthing,ground&nutral?
what happen when power factor of 2 parallely operated transformer become equle?
Scott connection is used for A 3-phase to 2-phase conversion B to achieve higher effciency C to save copper D to reduce harmonics
what is sevice settings for mccb?How can be it setted?
why the active power flow of some line is increased when the active power of out is cut ?
A 400 V, 50 Hz, Δ connected synchronous generator has a field reactance of 0.1 Ω and armature resistance of 0.015 Ω. At full load, the machine supplies 1200 A at 0.8 pf lagging. Under full-load conditions, the friction and windage losses are 40 KW and the core losses are 30 KW. What is the machine’s overall efficiency? Ignore any field circuit losses.
What is meant by sag?
1))why we run three phase or three different circuit from a single conduit 2)) why not two circuit of different phase run in same conduit?? and why we run same three cicuit of same phae run in single conduit??
1.WHAT IS A SMART CAPABLE DB ( DISTRIBUTION BOX) ? 2. HOW TO DECIDE THE TYPE OF DB TO BE USED ( RECESSED/ PLUG TYPE/ SMART ETC ETC? 3. WHAT IS MILLENEUM BUS BAR USED IN DB? 4.DIFFERENTIATE MCCB AND MCB.
what is the use of Auto re-closer?
dear sir/madam i want to get some knowledge about RRB EXAMINATION(section engineer) 1- what is minimum cut off 2- wht portion is major portion . 3- can any body provide Sample paper. thanks & regards ashish
