what is the difference between power and distribution
transformer?
Answer Posted / sakthi
there are two types of transformer 1. power T/R 2.
distribution T/R 1. power tranformer is using ii high
voltage tranmission
2. distribution T/R for low voltage transmission
| Is This Answer Correct ? | 0 Yes | 5 No |
Post New Answer View All Answers
WHAT CAUSED THRESHOLD VOLTAGE TO EXIST?
Dear all, I'm manikandan I have done by DIPLOMA EEE from 2011 , I have 5 years of experience from Power plant instrumentation field , which one field is give long life & which one field is best ,I confused a lot and also I'm studying AMIE, can I choose which department from Section B examination? pls tell me
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
When we need up only in o/p 440v, so why we use directly in 11kva in input?
1.what is meaning of curve into a mcb. 2.what is basic reason changing of curve
how can service sitting be setted for MCCB?Example for sittings IR (CURRENT RATING),IS(CURRENT STARTING)IO (current operating
volts=230 c=10mf a=??
Give details of your interested designation, the post you are interested to serve the company better and explain why you think you can serve the company better in such position if employed?
What is the typical enclosure type used for Indoor switchgear / Outdoor switchgear Units? - In Onshore / offshore Units?
When lag/lead/lag-lead compensation is employed?
What are the advantages of the three-phase motor over single phase motor?
What Is Connection APFC Panel In Compony.
Dear sir, my knowledge about cable size determination is limited. Though I read examples I could not calculate the Cable size required for electric driven pump 40 KW, 380 Volt, 50 HZ, 50 meter from transformer and it is three phase star delta starting. Please help as there is no one in my surroundings to help.
describe the A.C. Generator Testing procedure
63MVA,220KV/6.9KV Transformer LV side neutral is connected to Earth pit through NGR. Whether this earth pit required to connect with near by below grouding earth mat or it is to be kept separate?