why earth hole size is biggest in plug point?
- 22 Answers
- 39041 Views
- Al Qabas, HCL, RRB, I also Faced
- E-Mail Answers
Answer Posted / vikas jauhari
I am fully agree with Mr. RD Dadhich....
This is well explained in BS1363...
so don't forget there is no connection with cross sectional
area for low resistive path
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
We have a distribution transformer of 750KVA/11kv/440v and an AVR (Servo Stabilizer) of 750KVA on the LT side of distribution transformer. Also we have an ACB of 1200A on the output of distribution transformer (that is on the input of AVR). We want to have an MCCB on the output of AVR. What should be the rating?
What is clock position of Transformer?what are the clock positions are there?and what is different of them?
What is the armature mmf in a D.C machine?
Define phase cross over?
what is the purpose of bypass mode in energy lighting transformer?
What is the meaning of C1, C61, C91 cable
What is mean by STUB protection?
what are the range of memory address in plc for L&T lx7 4A
current transformer balance the power level on both sides. e.g in case of step up, at secondary side voltage rise but current decrease and vice versa in case of step down transformer. but how this power level remains same in case of current transformer and voltage transformer
I am getting above 60 V as open delta voltage against single phase unit ICT at tertiary delta formed and ICT getting trippped on NDR. ICT tested and found in order. PTs provided on tertiary are tested and in order. what may be the reason?
if a 3phase 100kva distribution transformer , 400 v,50 hz, 4-wire system is loaded at 160 k.w mostly 1-phase Lighting & Airconditioning split a.c load what will be the net effect on the power system in terms of voltage, powerfactor, current , efficiency of xformer
What do you mean by reach and reach the point of the relay?
a 100mva,400/200v transformer has leakage impdce of 10% draws a steady state line currentof---------------
and gate circuit diagram,amplifier circuit diagram
Why cables and busbar both needed in LT Panels?
