Interested to Buy Any Domain ? << Click Here >> for more details...
bit confused - am i correct in thinking that to determine
line to line voltage in a star config 110v 3 phase 4 wire
distribution system i would use a voltmeter?
I have a circuit configured as an unbalanced load,
consisting of three incandescent lamps (1x40w, 1x60w,
1x100w - all 110v rated)connected in a star configuration
to a 110v 3 phase 4 wire distribution system.
I want to find out what types of meters i would use to
obtain:
a) each line to line voltage
b) the line to neutral voltage across each load
c) current flowing in each line and load
d) current flowing in the neutral conductor
e) power supplied to the loads
im assuming i would be using ammeters in series along each
line and voltmeters in parallel across each line to neutral?
Also how could i predict these meter readings before taking
them and with which formulae?
Any help would be greatly appreciated
A.
- 1 Answers
- 3261 Views
- I also Faced
- E-Mail Answers
Answer Posted / shan80
please tell me how much load current in ur systen and i
will fix ur problem.
zkhalid80@yahoo.com
| Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
how can service sitting be setted for MCCB?Example for sittings IR (CURRENT RATING),IS(CURRENT STARTING)IO (current operating
What is the difference between Delta & Wye windings?
L.A. (Lightening Arrester) is located at a place from where transmission line enters the transmitting substation. So L.A. (Lightening Arrester) is the first equipments which has to encounter with lightening, high voltage surges and switching surges. It has to absorb energy of lightening, high voltage surges, and switching surges. L.A. (Lightening Arrester) is made up of layers of semiconductors. If these layers can not tolerate energy released by lightening, high voltage surges, and switching surges the L.A. (Lightening Arrester) blasts.
Explain in details how you would react to an unexpected incident when your supervisor or manager is not around to give instructions?
why single phase to grd test in HV cable?why not 2 phase at a time?
operation of diesel generator
What is the difference between earthing,ground&nutral?
What is resolution of a measurement?
What is the maximum number of swithes that can be connected in series up to down stream point in an LV Distribution system?
How to Calculate KA Rating of Main LT Panel
What fomula is used to calculate: 1. rated frequency withstand voltage, and 2. rated lightning impulse withstand voltage.
An ISP is granted a block of addresses starting with 150.80.0.0/16. The ISP wants to distribute these blocks to 2600 customers as follows. a) 200 medium size businesses; each needs 16 addresses b) 400 small businesses; each needs 8 addresses c) 2000 households; each needs 4 addresses Design the subblocks and give the slash notation for each subblock. Find out how many addresses are still available after these allocations.
why steady state stability limit is greater than transient stability limit ? How it can be explained ?
what is the power rating of CPU, CRT type moniter, LCD type moniter,scanner Approx.
Whether IP65 enclosure box blocks ventilation if driver for LED have to enclosed inside IP65 box
