Answer Posted / rabitha panat
As per IS:3495,the average water absorption shall not be
more than 20 persent by weight upto class 12.5 and 15
persent by weight for higher classes in 24hrs.Bricks,which
do not conform to this requirement shall be rejected.Over
or under burnt bricks are not acceptable for use in the
works.
| Is This Answer Correct ? | 17 Yes | 4 No |
Post New Answer View All Answers
how to calculate the steel in 500yard
how to calculate load bearing column
Consumption of Binding wire for fixing of cover block in vertical surface
04. a. Slenderness ratio…………… 1 b. If the height of a stage is 15-0 & dia. of the prop is 5, the slenderness ratio is….… 1 c. If the height of a stage is 10-0 & dia of prop is 3, the number of bracing will be…… 1
in the earthquqke the profile of water on dam is parabolic or not
How to calculate 1 brss for RCC work
what is that one cub metre plaster in cemant and fine sand
manhole height is 1500 mm and width of brickwork is 230 mm dia of manhole covering is 560 mm brick masonry 1:4 horizontal length is 1500 mm and plaster 12 mm thick on both side 1:3. how to estimate the quantity of brickwork with mortar cement and sand for manhole chamber.
4. Differentiate between NC and OC soils. Draw curves for (i) Stress vs Strain (ii) Volume charge vs Strain (iii) Pore pressure vs Strain for these soils
How to arrive dry volume of concrete (1.52 to 1.57) ?
difference between fc and fc'?
What are moment of inertia and its importance in civil engineering?
can any one tell me in detail footing estimation .. i am new here in dubai so facing lots of problem...
What is the best type of wood glue?
How we can calculate the cement, sand,bricks , water , quintity in 1:6 Ratio 1 cubic metre b/w and 1:4 Ratio in 1 Squre metre b/w????
