Interested to Buy Any Domain ? << Click Here >> for more details...
I have a transformer whose primary operates at 230V, 50Hz
for which the secondary voltage will be 12V, 50Hz. What
will be the secondary voltage if the primary is fed with
400V, 8KHZ Signal?
- 6 Answers
- 9975 Views
- ABB, I also Faced
- E-Mail Answers
Answer Posted / satya
20.86v.8khz
| Is This Answer Correct ? | 1 Yes | 6 No |
Post New Answer View All Answers
Sir,In our company there are 3 caterpillar make(capacity:(1) 3.3KV,2.5MW(2)3.3KV,2.5MW & (3)3.3KV,1.9MW) & 1 deutz make (capacity:11KV,3.8MW)gas engines utilised,all are running in paralell. There are three transformer utilised,(1) 6.25MVA,3.3KV/22KV,Impedence voltage:6.7% used for two generator,both are 2.5MW(2)5.5MVA,3.3KV/22KV,Impedence voltage:7.2% used for one generator of 2.5MW & (3) 5.5MVA,11KV/22KV,Impedence voltage:7.8% used for one generator of 2.5MW.all generator breakers capacity of 1250Amps. Sir,I want the details of fault level calculation of generator,transformer individually & for whole system. If you require any information from me.feel free for contact me sir.pl.send the answer of my question as the earliest as possible.
What id difference between power and energy?
Load transfer in 11kv double busbar switchgear - operation.
in dc suppy frequency is zero why? if dc frequency is zero how to exist dc transients and ac transients
I'm generating a pulse of 3V with frequency 80Hz (12.5ms time period) and pulse duration 0.125ms and feeding it to a transformer since i want the pulse to get amplified around 60V. At the output amplification s happening but the pulse is changed to a spike, can you tell me what could be the reason? (an ordinary transformer 220V-12V stepdown transformer is reverse connected ie. now it is 12V-220V stepup and voltage amplification happens)
What is a DC series motor?
What Is HO factor in power selection
what is the meaning of neutral displacement ???
Can you explain about pole discrepancy scheme
If a shunt Dynamo has induced emf 100V and 0.4 ohm resistance and battery of accumulator of open circuit emf 110V and 0.5 Ohm resistance are in parallel what is common terminal potential difference?
In single phase ac ups supply when current is measured with tong tester neutral current is found more than phase current.What is the reason?
what is the transformer turn ratio formula and give some examples?
In Designing the rating & accessories of a MCCB how to choose the type of releases..means what is the basis for selecting, thermal magnetic, electromagnetic & microprocessr based releases
How to calculate the phase to phase clearness of HT /// LT bus bar?????
how to get electrical supervisour certificate in gujarat
