What is plugging as applied to an induction motor?
- 3 Answers
- 26348 Views
- I also Faced
- E-Mail Answers
Answer Posted / neha a patel
The Induction motor can be stopped immediately by just
interchanging any two of the stator leads. When an
induction motor is rotating at a high speed, during
emergency if situation arises that the motor has to be
stopped immediately, can be done by interchanging any 2
leads of the stator supply. By doing this, it reverses the
direction of the revolving flux, which produces a torque in
the reverse direction, thus causing a breaking effect on
the rotor. This breaking period is called the “Plugging”
period
| Is This Answer Correct ? | 85 Yes | 3 No |
Post New Answer View All Answers
A 100W electric lamp is supplied from a 115V, 60HZ source. The peak instantaneous power dissipated in the lamp filament is
Meaning of ingrace protection for motor.for ex IPXY
I have 2500KVA transformer delta/star,13.8KV/380V provided with LV 4000A breaker. Already I have 2300KW motor feeder with a full load 90%. Is it possible to connect another 1600A from that breaker? If so how the calculation is done?
i am going to correct power factor of 1600kw induction motor,when i calculate capacitance of capacitor it is three time more in star connection than delta. if motor is star connected which connection i shall adopt for capacitors and reason for adopt this connection
WHAT IS THE DIFFERENE IN ACTION OF MCB,MCCB,RCCB
what is formula for calculate thermal overload in new numiricalrelay( not in bimetal relay)?
What are the Return ( Monthly / quarterly/ Annual submitted to Electical Inspector for an establishment (Factory in Maharashtra-- Small scale category having seperate HT line of 22KV ) as per Maharashtra Electricity Act
In radial network the source is fed from 1 end both ends at central
How many types of oil using in H/T & L/T Oil Circuit Breakers. need Explenation ?
will there be any problem by recovering slip from single phase induction motors?
how can service sitting be setted for MCCB?Example for sittings IR (CURRENT RATING),IS(CURRENT STARTING)IO (current operating)?
we have provided 30 nos. relay contacts in panel.I want to know how do we do the numbering for the relay contacts as per any applicable standards
If you have an earth with pilecap then your resistance is really low. why and how?
Determine a suitable number of slors and conductors per slot for the starter 1 winding of a 3 phase, 3300 V. SO Hz 300 rpm alternator. The diameter is 2.3 m
What is the difference between circuit breaker and isolator
