Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / deepa
ITS A ELECTRICAL BREAKDOWN OF THE GAS,RESULTING A CURRENT
FLOWING THROUGH NON CONDUCTING MEDIA SUCH AS AIR.
| Is This Answer Correct ? | 3 Yes | 0 No |
Post New Answer View All Answers
How to calculate earth fault current for 6.6 KV , 50 HZ , 756 Amps , 3000 RPM , 0.8 PF generator
generally in LT and MV motors we are using 3.5Coresx16,25,35,50 etc cable for supply.although motors is earthed at two point and having all protection.then why we are using that 1/2 core for earthing the motors.while in HT cable we are using only 3core cable for motor supply.generally lt and mv motors are delta connected and ht motors having star connection.whethere it is having any relation with winding connection( star or delta).all motors i am talking about are dol only.can anybody solve my confusion.thanks...
Define super node?
What will be the effect if I use inverter as UPS mood?
Differentiate between induced emf and self inductance?
When we use 3 terminal resistor?
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
how choose conductor&depending upon load
What are the limitations of Kirchoff's laws?
How to setting the volume of RTCC panel AVR (11kv) controller
How test for Ddo vector group test condition?
how to select the isolation tranformer for siemens 802dsl cnotroller
Can anyone please provide me details of MCCB/Contactor/SFU rating calculations for a motor feeder..for example 50 kw.. not from type-2 cordination chart. i want manual calculations..
when ID fan will immediately stop through VFD what exactly cause and problem the ID fan
Why negative feedback is preferred in the control system?
