Interested to Buy Any Domain ? << Click Here >> for more details...
What is mean by power factor?
- 18 Answers
- 28152 Views
- Shreem Electric Ltd, I also Faced
- E-Mail Answers
Answer Posted / santhoshbca
The power factor of an AC electric power system is defined
as the ratio of the real power flowing to the load to the
apparent power [1] [2], and is a number between 0 and 1
(frequently expressed as a percentage, e.g. 0.5 pf = 50%
pf). Real power is the capacity of the circuit for
performing work in a particular time
| Is This Answer Correct ? | 13 Yes | 4 No |
Post New Answer View All Answers
what is Different between Bilinear and Unilenier?
it is possible to measurement of tension of slipring induction motor(SRIM)carbon brushes, any maesuring instruments are available in the markets.
It is desired to flood light the front of a building 42 meters wide and 16 meters hig.Projectors of 30 degree beam spread and 1000 watt lamps giving 20 lumen/watt are availabl.If the desired level of illumination is 75 lumen/m and show a suitable scheme.Assume the cofficient of utilization, deprecitation factor and waste light factor are 0.4, 13 and 1.2 respectively.
Write the force balance equation of ideal spring element.
What is the procedure/activities to be taken to inject the current more than 2000A by using 2000A Loading Transformer?
What is the count of hvdc transmission lines in india?
Hello everyone, somebody knows what is a "surplice power" ? The hole phrase is: "This rating is appropriate for a generator set paralleled with an infinite bus e.g. a national electrical supply network or grid where the generator set is run at 100% load, 24 hours a day, 365 days a year and any surplice power is exported into the grid" Thanks in advance.
How could I get a certificate of competency as Electrical Supervisor? I have completed By BTech in Electrical this year(2012) for VJTI Mumbai Maharashtra. Is it compulsory to be produced while joining?
how technical is calculated in 11kv line and lt line
what is capacitor voltage transformer?? how it is different from potential transformer?
Explain with example of functional requirements of protection relay in terms reliability, selectivity, sensitivity
can we start slipring motor on star delta like we start induction motor ? if yes where will we connect ?
What is power distribution criteria for converting single phase unbalanced residential load to 3 phase star connected balance system. Does total KW converted to 3 Phase. Means Divided by root 3.
A 7 storey building has a floor area of 35,000sq.ft on each storey. On the ground floor 11KV electrical sub-station is to be erected. A load of 3kw for every 400sq.ft (p.f is 0.8) is proposed for each floor. fire pump 7.5hp, water pump 5hp, lift 2 nos, each 10hp and 20shop load of each shop is 5kw. calculate a. load each floor b. total load of building c. L.T feeders for aech floor and from transformer to main. d. distribution diagram e. capacity of sub-station/capacitor bank f. line diagram
For a spring controlled governer the relation F = ar+b (F is the controlling force, r is the radius of rotation a and b are constants), indicates that the governer is
