Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / nikunj thakkar
there is one simple question that why we are using KW and not HP?
ANS:-
as we know that is HP is unit of power in mechanical sometimes it happens that we say that am heaving 150W motor
and in market it the minimum size is in 0.5HP as said in above answer it is easy to calculate KW power of motor
second we are using motor to do mechanical work not electrical work so it would be easy to say that we heaving motor in HP not in KW
| Is This Answer Correct ? | 7 Yes | 4 No |
Post New Answer View All Answers
i need the details about bhel exam.how to apply for that.please send to my email-id.thenmozhi2k7@gmail.com
we have require a Motor (1500kW, 6.6kV, 50Hz) which shall operate at 1500rpm during 30min and after it shall run on 500rpm during 15min. The same cycle shall be repetitive during the whole working days. Which method is best and economic to achieve such type of task. VFD, VVFD, Pole changing motor etc.
If we want to change a contactor of faulty one what are the conditions want to fullfil
What is the Temperature to be set in Thermostat provided in Marshalling box of the Transformer / Motor.
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
what is cathodic protaction?
What is the physical significance of phase.. i.e. what is exactly the meaning in layman's language.. 1 phase, 3 phase etc ???
If i am running of spindle at 2000rpm ,but How to spindle stop at the second I am resetting the machine in CNC machines
how to decide no of electrodes for 1600A LT Main incomer panel
State angle criterion.
Dyn1 transformer vector group testing how to do
for 100 HP Induction motor service factor is 1.2(SF) we placed a VFD at the motor side load is balance with 0.3 Amp's Phase to Phase but at incoming of VFD load is un-balance with 10 to 20 Amp's what will be cause of load un balance
what is the difference between 4pole & 6pole DC Motors & give advantage ?
Why we use 4-20 mA Analog signal for the PLC input? Why not 0-20 mA? Why not 5-25 mA?
what is metering cum synchronizing panel and how it is used?
