Can the Neutral and Body Earthpits of a transformer
conncted together by Earth strips under ground.
Answer Posted / d. sivakumar
No it cannot be connected together but as per EIL standard
one earth strip connected with seperate Earth pit and
second earth strip connected with main grid earth pit. but
in normal standard for transformer neutral earthing 2 nos
seperate earth pit should be provided.
| Is This Answer Correct ? | 12 Yes | 3 No |
Post New Answer View All Answers
what are the application of over current relay?
What will be the impact on motor performance if a LT motor is rewound with changed motor winding data as given below:- Original winding data: total 04 wires = 02 wires of 17 SWG + 02 wires of 16.5 SWG. Changed Winding data: total 03 wires of 15.5 SWG wire size Motor rating: 160KW, 740RPM, 415V, ID FAN application. Normal Running Current = 95% of FL Current.
Explain about retrofitting of machine tool.
WHY IN AC DRIVES,INPUT PHASE CURRENT SHOW UNBALANCE?
we have require a Motor (1500kW, 6.6kV, 50Hz) which shall operate at 1500rpm during 30min and after it shall run on 500rpm during 15min. The same cycle shall be repetitive during the whole working days. Which method is best and economic to achieve such type of task. VFD, VVFD, Pole changing motor etc.
How much earthing frequency is capable?
what are symmetrical and non symmetrical components in electrical installation.
There are a trformer and an induction machine. Those two have the same supply. For which device the load current will be maximum? And why?
use of PIR in ehv breaker
Define phase cross over?
List examples of voltage source?
What are the section criteria for cables. Now everywhere XLPE power cable is used or PVC is also used?.
How to determine alternating current frequency?
IF HT CAPACITOR IN ON POSITION IS THERE ANY LOSSES I.S I SQURE OCCURS IN THE SYSTEM
battery capacity use of made?