what should be the resistance between two winding.
Let 10 kw motor
Answer Posted / naveen singhal
1 ohm
Is This Answer Correct ? | 3 Yes | 5 No |
Post New Answer View All Answers
How many sprinklers should be in one pipe line?
What are conduct on the testing in cf in ur site?
How to calibrate or test an LT Air Circuit breaker 440 volts, 35 KA, 800 Amps ?
Explain the propagation of harmonics in the network and influence of phase angle of harmonics.
i have a 4 Mva transformer 34.5 kv / 480-277 v and i used 2 parallel 3200 amp bus duct for the secondary feeder using 3 ply of bus bar ( 3/8" x 5" ) as a common where the flexible link terminated and 6300 amps breaker for the main, the lower bus duct reaches 70 degrees and the upper bus duct reaches 55 degrees when i used thermal scanner. why the temperature is not balance when the load reaches 3600 amps.
Why we used 690V in ACS 800 drives.Why dont use standard voltage like 415v or 1.1Kv
what is meant by impulse voltage?
If we connect a motor and generator together (I mean that the generator gives the motor electricity and the motor gives the generator movement) regardless the losses. Will the generator still generate and the motor still move?
whether starting current is limited to rated current of motor through soft starting or it exceeds the rated current?
How to calculate earth fault current for 6.6 KV , 50 HZ , 756 Amps , 3000 RPM , 0.8 PF generator
how i can calculate the size for fire cable
1. How many types of mangers? 2.How many types of capacitors? 3.pls tell me normally types alternator problems?
How to calculate KVA/VA rating of PT or CT from primary & secondary voltage or primary & secondary current?
how the aircraft outer body and inner body is separated ?
If only R Phase is connected in 2 pole elcb, n is not connected than it will work or not in ground fault.