Interested to Buy Any Domain ? << Click Here >> for more details...
what is the various utilities of the process plant?
- 9 Answers
- 39698 Views
- I also Faced
- E-Mail Answers
Answer Posted / rajasekhar
Air,nitrogen,steam,oxygen,cooling water and electricity
these are main utilities used in refinery.
| Is This Answer Correct ? | 56 Yes | 3 No |
Post New Answer View All Answers
What is the maximum permissible Earth to Neutral voltage in an electrical system.
What are the assumptions made on conservation equation?
Can condensate control in a reboiler cause water hammer problems?
At what temperature does water have maximum density?
X is strong but has a very low density (1% of traditional earth materials.) and hence light weight. It is a recyclable material. The compression behaviour of X is strain rate dependent. Higher strain rates result in higher initial modulus and higher compression strength. It can also withstand unlimited number of cycling loading provided the repetitive loads are kept below 80% of the compressive strength. The internal structure of the material includes air-traps which make it poor heat conductor. X is non- biodegradable and chemically inert in both soil and water. Most acids and their water solutions do not attack it; however strong oxidizing acids do. Solvents which attack X include esters, ketones, ethers, aromatic and aliphatic hydrocarbons and their emulsions, among others. It does not support bacterial/fungal growth as well .It also has significant acoustic properties and effectively reduces the transmission of airborne sound. X is combustible and should not be exposed to open flame or other ignition sources. Combustion products are carbon monoxide, carbon dioxide, water and soot. Long-term exposure to sunlight causes yellowing and a slight embrittlement of the surface due to ultraviolet light. X is able to withstand the rigours of temperature cycling, assuring long-term performance.
What are the advantages of using gear pumps?
how much maximum power can be generated by 320v, 10kg-cm synchronus motor if shaft is roteted mechanically at 50 to 60 rpm?
The job profile as a Service Engineer?
What is pneumatic conveying?
Are there any methods of preventing cracking of carbon steel welds in refining environments?
What are the apt definitions for apparent power, active power and reactive power? Explain about different types of lamps?
What is an effective means of removing silicon from aluminum?
Name the some common problems associated with bellow expansion joints?
What is some good advice for specifying allowable pressure drops in shell and tube exchangers for heavy hydrocarbons?
What are some common problems associated with dilute phase pneumatic conveying?
