Interested to Buy Any Domain ? << Click Here >> for more details...
what is power factor? whether it should be high or low? why?
- 11 Answers
- 17376 Views
- I also Faced
- E-Mail Answers
Answer Posted / laxminarayana
Power factor should be high in order to get smooth
operation of the system.Low power factor means losses will
be more
| Is This Answer Correct ? | 10 Yes | 2 No |
Post New Answer View All Answers
If any HVDC line is going with positive & negative(the negative usually have return path of current with earthing electrode). Now the question is if this HVDC earthed electrode which is using as return path and earthed any nearby 400kv or 220kv AC substation equipments. which will be the impact of this on AC substation & its equipment, how severe may be this and what should be the minimum distance require between HVDC earthed electrode and AC substation equipments? It's really an high engineering level question...Dare to answer and increase your knowledge.
we have two motors 1250kW,6.6kV to be coupled on the same shaft ,so please provide assistance for their synchronisation.
how we start 40w tube light with 4 diodes,2capacitors,1 choke and without starter.(a product avilable in market which lights burnt tube lights also)
What are the reasons for the parallel operation of transformers?
Why magnetic flux produces an induced current?? what is the detailed procedure ?? ans plz
Differentiate between digital phase converter and ordinary phase converter.
armature winding of dc machine produce alternating emf then it convert in to dc by using commutator.But only we consider armature resistance why don't we consider inductive reactane effect?
in my industry we are using 3 step up transformers for induction heaters..i.e 415/580v and other are 11/440v.in power consumption does a step trnsformer makes any difference compared to step up?? plz explain
What is called grain-oriented laminations?
1. What is maximum permissible distance between smoke detectors ? 2. How do we decide number of smoke detectors required in a large office, warehouse, hall etc ? 3. What should be maximum height of smoke detectors ? 4. Where do we use heat detector, optical smoke detector, temperature sensitive detector ?
what is cogging and crawling
What is meant by celling voltage & current in excitor ?
What happened if C.T mount at any cable or Bus bar in wrong direction . C.T going on proper work or not . C,T direction is essential thing to properly work.
If symmetrical fault occurs at the terminal of a synchronous motor then how the motor will act...explain it..
how to carried out tan delta test in 11 KV alternator ?
