Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / pawan pratap
IN ONLINE UPS THERE IS A DOUBLE CONVERSION AC TO DC THEN DC
TO AC.SO THERE IS NO INTERRUPTION IN ONLINE UPS WHEN MAIN
SUPPLY FAILS.BUT IN OFF LINE UPS THERE IS ONLY ONE
CONVERSION AT A TIME EITHER AC TO DC OR DC TO AC WHICH
SWITCH OVER WHEN CAHNGE OVER DONE.
| Is This Answer Correct ? | 29 Yes | 4 No |
Post New Answer View All Answers
how to test and calculat the head and discharge in borewell compressor
Explain the operation principle, advantages and disadvantages of the following converters: a) A 12 pulse converter b) A Switch-mode inverter c) A thyristor inverter
I need to connect a synchronous generator to the grid using automatic synchronization and two circuit breakers (one for synchronization, one for end connection to the grid), how to determinate the required diameter of the cables?
Why frequency changes due to load variation in power system ? i.e why when load increases frequency decreases?
What is the use of lag compensator?
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
send me all basic electrical question and answers
In our factory so many iron pillors are exists for supporting the shed/Hangar. If do more no of earthings at one piller instead of doing more earth pits in many locations and running earth strip around the hanger, I can save the money. Please suggest this method is acceptable as per Is specifications though the Earth resitance of the farthest piller is with in the limits as per IS specifications.
A motor running with lenze frequiency inverter stops if I REDUCE SPEED with 25% load.If I run it in High speed and medium speed running smoothly with full load.please help me to solve it.
What is s-domain and its significance?
What is shunt voltage and u v voltage witch one best
why ahould you show client/engineer activities clearly on the project plan
what is the function of Moulded case circuit breaker, why it is called Moulded?
I need bhel previous year quetion papers for electrical engineering department.I searched but i could not find out
WHY THE RATINGS OF THE TRANSFORMER IS 33KV WHY NOT OTHER???
