WHY THE FREQUENCY IS 50 HZ IN INDIA.CAN WE USE SOME OTHER
FREQUENCY.IF SO WHAT IS THE RANGE AND WHAT WILL BE THE
EFFECT IN PRESENT POWER SYSTEM IF WE CHANGE THE FREQUENCY
AS YOU SUGGEST ?
Answer Posted / rvg
Question :
WHY THE FREQUENCY IS 50 HZ IN INDIA
Ans: The material properties of ferromagnetic substances
having great importance in selecting frequency. Frequency
range from 45 Hz to 70 Hz is useable region.
Another consideration is the core and copper loss. In core
loss, the power loss is proportional to frequency, and for
copper loss, is proportional to sq.of frequency.
Developing countries like India, defenitely select the
chepest option, thats 50 HZ.
Another consideration is equipment availablity.
Equipment availibility is only in the range of 50 Hz and 60
Hz. If we chose some other frq. say 70 Hz, Indian
manufactures has to produce accordingly, and that will
create less utilization of ferro magnetic materials.
From above, the conclusion is 50Hz is most suitable and
economical option.
Is This Answer Correct ? | 78 Yes | 9 No |
Post New Answer View All Answers
what is settable hystersis protection? If any body knows plz kindly post the answer..
what is reactive power?, why its measured in VA ? is it transient behavior of system?
why is the power generator connected as star earthed or star earthed through reactance and what its features ?
what is the differance between HT motors And LT MOTORS.
placement paper samples of mspl company
How can I model an open-delta ground transformer for a network supplied by 4 unit GTG and power transformer in ETAP?
Explain what cmos is and its benefits?
What is oscillator circuit?
describe the Operation of induction generators from bus bars
What is a dominant pole?
What is Fire Panel ? How it works ?
How to check the thermocouple is correctly connected to cable for K type? (i,e positive pole is connected to non magnetic conductor and negative pole is connected to magnetic conductor)
When a single pase capacitor run motor- run on 230vac and Case(1)run with 8 Mfd 250 vac.capacitor , Case( 2) run with 8 Mfd 400vac capacitor. What is difference between both case regarding power ,efficiency etc?
how to find out cable size if load is 2800 watts, 230 volts AC supply and load distance is 1800 meters
what is the significance of terminal voltage and phase sequence in the operation of paralleling of two generators?