Interested to Buy Any Domain ? << Click Here >> for more details...
why skin effect is decreases with decrease with frequency?
why skin effect occur
- 5 Answers
- 15869 Views
- Kirloskar, I also Faced
- E-Mail Answers
Answer Posted / pyobik
skin effect is a phenomenon occuring in solid conductor
carrying AC supply, which leds the current to flow maximum
at the surface, this current density difference at the core
and the surface is due to the flux linkage in the core of
the conductor is more and leads to greater inductance
inside the core. And the skin effect occurs!
and the inductance is dependent on the frequency.
| Is This Answer Correct ? | 38 Yes | 4 No |
Post New Answer View All Answers
If I want to replace a 26KW Slip ring Motor with a Squirrel Cage motor & Drive (for a Hoist Application). How can I approximate the Motor & Drive HP required in new Setup.
HELLO EVERYONE, I RECENTLY HAVE FOUND ONE PROBLEM, I WAS TAKING NO LOAD TRIAL OF AN HT MOTOR 920 MOTOR , 1440 RPM , 6.6 KV, WITH AUTO TRANSFORMER. AT 450 V, LOAD WAS 40 AMP AND SPEED WAS 250 RPM. BUT AS WE INCREASE VOLTAGE FROM 450 TO 480V, LOAD BECOME 41 AND SPEED REDUCED TO SOME RPM . SO WHICH PHENOMENON ACTED HERE FOR REDUCING SPEED.?? AND IS IT HAPPENING ALWAYS OR IT IS RARE? I ALSO HAVE FACED SUCH PROBLEM WITH FEW LT MOTOR ALSO.
how to calculate insulation level of transformer?
oltc of a transformer, how it works? and what are the equipment consist of describe briefly?
What do you mean by transformation ratio of instrument transformer?
When calculation of fault current and fault Kva is to be done,why always we use per unit value and why we consider the base kva?
at which voltage level arcing ground is occurs ??????????
How is magnetic leakage reduced?
I want formula to calculate cable size as per load given in length & amp. I searched many sites but didn't right answer. Please reply me asap.
Which cable is use for rtcc control panel
how brushed dc motor operating ?
Can the output voltage of a rectifier be greater than the input AC voltage without the use of any voltage multiplier in the circuit??please provide the explanation too..
what is the difference between megger and earth resister ??
Don't you have similar question banks related to Oral Certification Examination conducted by Mercantile Marine Departments / Directorate of Shipping, Ministry of Shipping for Electro Technical Officer?
What is the requirement of grounding the neutral of single phase generators on load? If the neutral is not grounded, what will be the effect?
