Is it advantages of having star-delta vfd than normal star vfd , if yes why?
Draw a flow chart and write a program for the difference between the sum of elements with odd and even numbers. Two dimensional array.
How can company withdraw the amount of Group Superannuation of the employee who has left the job before completion of one year ?
Please let me know the important Interview concepts to be learnt for PO,OM and INV Modules
. what are insurance items?
Who has experience with epik or datafeedscripts.net? What better use for working with Shopzilla API?
can wwe trace a java program (class)
Please tell me about the pH of Polycaboxylic ether is it in the 5-6 range ever or more than 6
Required concret Surface Temperature prior to coating of epoxy pain with references ASTM or ACI whatever
How to Create a Dashboard?
Trafo ratio is 11kV/6.6kv,Vector group is YND11. What will be the effect if secondary is used for earthed system.
difference between windows 2003 and windows 2008 server
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
hai im going to face ibps SO IT officers grade 1 interview. if anyone had an idea plz tel me expected and experienced questions and mail to firstname.lastname@example.org
do we decide reinforcement steel , based on bending moment ? give example with continous slab?