Written Test Paper is as Follows.


CTS Placement Papers | CTS Interview Procedure | 
CTS Aptitude Questions | CTS Technical Questions | 
CTS Interview Questions


Mathematics:

1. A rail network consist of 68 routes touching station A, B, C. 5 routes 
touches each of the three station. 2 routes touches B, C; 3 route touches 
B, A. 4 Route touches A, C. The ratio of route touching the A:B:C are 
11:15:8. Find out how many route touches A, B, C, only. Find out also how 
many route touches A, B, C station?


2. Two consecutive sides of a cube were painted with dark colour, and the 
opposite faces were painted with white. Rest of them is painted with 
yellow. The cube is divided into 64 equal parts. How many of them are 
painted in (i) one side only (ii) two side only?

3.  Similar cube problem from RS Agarwal.

4.  Vein Diagram problem

CTS Placement Papers | CTS Interview Procedure | 
CTS Aptitude Questions | CTS Technical Questions | 
CTS Interview Questions


Logical reasoning:

1. Blood relation problems; if A-B means A is daughter of B, A+B means A 
is son of B then find out ...
2. Logical vein Diagram
3. Find out the odd figure
4. In a rectangular table, eight persons are sitting facing each other. 
Some of the conditions are given, like P is left to R, S is extreme left, 
T is right of V, U & V are just opposite, then find out..
 
English

1) Two comprehension Passages were given 

2) Find out the incorrect & correct sentence

30  Arrange according to sequential order

Regarding the aptitude test, RS Agrawal is enough.
 
After the aptitude test, there was personal interview. I have Physics as 
my subject, so they asked me from that. 

Personal Interview :


1.say about yourself?
2.why did you choose Cognizant?
3.What is your career goal in our company?
4.say Newton?s 2nd Law?
5.What is your advantage, key skill & weakness?
6.What is the definition of horsepower?
7.What is load?
8.What is machine?
9.about diode?
10.Simple numerical problems from Class XII book?
11.What is the difference between Kwatt & K-Watt hour?
12.Why did you took Physics in Graduation & why you choosing to enter the 
It sector?
13.Do you think Physics will be any advantage for working with us?
14.What is learning?
15.Say one most embarrassing case You faced and how did you overcome it?
16.what activities did you took part as an organizer ?
17.What is the headline of Today?s Newspaper?What is your opinion on 
reservation?
18.What is your opinion of hanging of Saddam?
19.Have you any questions?

 
CTS Placement Papers | CTS Interview Procedure | 
CTS Aptitude Questions | CTS Technical Questions | 
CTS Interview Questions

 

for the cube problm
answer is:
8 parts r coated 3sides
24 parts r coated 2 sides
24 parts r coated 1 sides
8 parts r non coated

I am vamsi , a mechanical graduate, 2006 fresher. I have attended 'Robert 
Bosch' written test on 14 th November. 

Robert Bosch Placement Papers | Robert Bosch Interview Procedure | 
Robert Bosch Aptitude Questions | Robert Bosch Technical Questions | 
Robert Bosch Interview Questions


Only 60 to 70 people (Mechanical) were allowed to write the test who came 
with call letters. 


TOTAL DURATION OF TEST IS 90 min & "NEGETIVE MARKING IS THERE".

SECTION 1

Total 50 questions   correct Answer +2 marks , wrong answer  -1 mark.
Out of 50 ques....40 from engineering and 10 from aptitude.

SECTION 2
Total 25 questions on English.

Paper is as follows...

SECTION 1:

1. Two forces acting along the same line but in opposite directions. they 
are called           (c) 
a) Concurrent b) coplanar c) collinear   d) non concurrent     

2. Two basic systems of forces                (c)
a) Coplanar, concurrent             b)non concurrent, concurrent
c) Coplanar, non coplanar           d)concurrent, non coplanar       

3. Formula for  power in  HP 

4. Forces lying in the same plane but never met     (b)
a) concurrent  b)parallel   c)        d)

5. Ger ratio for helical gears one of 30 tooth and the other 60 tooth
a)800:1  b)2:1

6. Four rectangle strips of size 10 X 1 inch r placed on a table as shown 
in the figure. what is the area covered on the table.    (a)
a)36     b)40     c)1600    d)80

7. If you traveled 45 min at 4 miles per hr and 30 min at 3 miles per hr. 
what is the distance covered by you in 1 hr and 15 min. 
       (b)
a) 8 miles      b)6 miles         c)7miles          d)10

8. A ball of weight 10N is dropped freely from rest at a height of 4 mts. 
what is its total mechanical energy after it has travelled 1 meter.

Robert Bosch Placement Papers | Robert Bosch Interview Procedure | 
Robert Bosch Aptitude Questions | Robert Bosch Technical Questions | 
Robert Bosch Interview Questions



9. Two bodies of same mass r traveling at a velocity  of 2 m/sec in 
opposite direction. After collision one travelled with 1.8 m/sec what 
about the other..

a) equal to 1.8 m/sec          b)more than 1.8
c) Less then 1.8                d) can not say

10. If X-component of a force is -Ve and Y-component is +Ve, in which 
plane the Resultant would be      (a) 
 
a) First quadrant b) second    c) third           d) fourth 

11. A body is said 2 b in equilibrium      (c)

a) if it is in rest  b)if it is I uniform velocity
c) if the sum of the forces acting on it is zero     d)none

12. X15-X13+ X11-X9+X7-X5+X3-X=7 than value of X16  ? 

13. A chain of length 1 mt and mass 1 kg  is placed on a table.What length 
of the chain must be hanged freely from the table so that is will drag the 
remaining chain freely    (d)

a).55        b).66         c) 0.5         d).75

14. Main purpose of governer       (d)

a) to live happy life         b) to increase engine speed 
c) to decrease engine  speed  d)to run engine smoothly

15. A steel beam of mass m and length l is placed on a surface.a couple u 
is applied at the ends to rotate the beam at 90 0 . what is the work done?

16.A & B r two weight lifters. A can lift 100 pounds 10 times a minute, 
where as b lifts 100 pounds  10 times a sec.who is doing more power and 
work.    (c)

a)A&B  b)A omly   c) B only    d) none.

17. A ship is 77 Km away from the shore.It had a leak due to ehich water 
is flowing into the ship @ 1 ton /min .A pump is used to pump the water 
out of the ship @ 30 ton/ hr The ship sinks if the water Qty reaches 210 
ton.what should b the speed of the ship to reach the shore before it 
sinks.    (b)

a)7 mph   b)11mph     c)15    d)20

18. Very simple ..que..find the hypotenuse ..

1) Sides 8, 11, find hyp          2) a similar one..to find side..

19. Which is the largest side in a right angled triangle

a) hypotenuse    b)edgescent side  c)opposite side

20. The angle of depression from the top a building  to another building 
is 120. the distance   b/n the two is 50 mts. What is the difference in 
the height of buildings.      (a)

a) 10.6   b)20.3          c)10.4            d)48.9   

Robert Bosch Placement Papers | Robert Bosch Interview Procedure | 
Robert Bosch Aptitude Questions | Robert Bosch Technical Questions | 
Robert Bosch Interview Questions


21. Simplyfy    [ 3v--- 27  -  v-(27/4)]2   

22. Belt drives are mainly used for          (d)

a)to reverse the direction of power in belts. b)to transmit it power.   c)
to ....d) all

23. BS thread profile has   
                          
a)141/2    0     b)450                     c)250            d) 90 0   

24. The main purpose of bearings    (b)

a)to reduse noise.  b)to reduce friction     c)        d)

25. When compared to spur gears bevel gears are more .. (a)

a) noisy  b)smooth   

26. The angle b/n bore axis of gear and the tangent to the teeth profile 
is called    (b)

a)P.A  b) helix    c)

27. The circle touching the outer edge of the teeth is called  (c)

a) Base circle..b) pitch crcl    c) addendum crcl   d)...

28.  The area of the piston A is 10 cm2  and that of B is 4 cm 2. If 10n 
load is applied on the piston A what is the force on the  piston 
B.          (c)

a)100N      b)40N    c)10N   d)none

29. The force exerted by a spring depends on       (d)  

a)Material of the spring b)Design of the spring   c)Length of the spring   
d)all

30. If a body is isolate from it's mating parts and all forces acting on 
it r shown then it is  called.     (c)

a)BM  diagram  b)  SF diagram  c)free body diagram   d)none

31. A coin and a ring of same mass and diameter r allowed to roll smoothly 
from the top of a inclined plane. which one reaches the bottom first.  
   
a)coin   b) ring   c)both reaches same time   d) none

32. A ball is thrown  horizontally .After  hitting the ground it again 
raises with some velocity. this is bcoz..     (b)

a) ball is stil having velocity  b) it gains momentum  from the ground.  
c)     d)

33. a problem on balancing masses..

34. a mass is rotating..with rad /sec..simple problem ..on basics..

35 given 0<a<b<c<d then which of the following is least value.  (c)

a)c+d/ a+b    b)c+a/b+d  c)a+b/ c+d   d)...

Remaining questions i did not remember .

SECTION  2:

51 to 55 }  Passage with blanks..

56 to 60 } antother passage with blanks..

61 to 65 proverbs..

1. don't look a gifted horse..

a)at          b)in life...   c) in dreams    d)

2. more hands.......

a) make  more work easy  b)more light work   c)    d)

3. people living in glass houses....

a)may not throw stones   b)didn't throw stones  c) cannot throw stones  d)
should not throw stones


4 and 5 like this only.


65 to 75  appropriate meaning

1. Go for .........       (a)

a) try   b)get it   c)quit    d)

2. Go overboard....     (a)
a)exaggerated     b)exagerate   c)  exagratred    d) none.

3. Go bad  ........
a).... b)bad    c)not good    d) none

4. go wrong   ........      (b)
a)fail    b)  mistake    c)       d)

5. meaning of batten ....       (a)
a) noun  :a long wood of metal strip       b).......  c).....   .d).....

Thats all guys waiting for results.

Robert Bosch Placement Papers | Robert Bosch Interview Procedure | 
Robert Bosch Aptitude Questions | Robert Bosch Technical Questions | 
Robert Bosch Interview Questions

Satyam Placement Papers | Satyam Interview Procedure | 
Satyam Aptitude Questions | Satyam Technical Questions | 
Satyam Interview Questions



Iam selected in Satyam .
This is the Satyam pattern which I faced at Kala bharati, Visakhapatnam. I 
am from St. Theressa Institute of engineering & Technology, Vijayanagaram. 

Written Test: 15-questions. 


1-mark for right answer, 1/4 minus for every wrong answer. 

negative marking will be there, don't try to guess the answers. 

Many question were very easy but  try to confuse you.
 
Most of the questions were from "Quantitative Aptitude" by R.S AGGARWAL 

Topics from which  questions  are asked are

1.  series completion, 
2.  Data Interpetation 
3.  Compound interest 
4.  Trains & speed 
5.  work and Time 
6.  Averages 
7.  Clocks....Angle between hour hand and minutes hand ..... 
8.  Volumes 
9.  Percentages 
10. problem on Ages 
11. Reasoning question 
            

you can clear written if more than 6 correct 

Satyam Placement Papers | Satyam Interview Procedure | 
Satyam Aptitude Questions | Satyam Technical Questions | 
Satyam Interview Questions


I cleared Written. My GD topic "Rural development" 

The main elimination round of the Satyam. My group contains 10 members. HR 
asked us to suggest us the topic and 10 suggested 10 topics out of which 
HR choose the topic and it was "Rural development" We were given two 
minutes time to note down the points. 

But one member started at that time only.  Discussion was very nice. The 
discussion went on for 10 - 15 minutes. 

TIPS for GD:
 
1. If possible try to start first, if not no problem but try to speak 
effectively.
 
2. fix to your attitude, it is if the opposite person argues strongly 
don't leave your topic go towards others. 

3. It's a discussion don't make it as Debate ,be cool.  They test your 
patience too when you are at heavy argument. Patience doesn't mean silence 
but talk smoothly, try to convince your offenders. (Best way is say "yes" 
and say your way is best one) .

4. Always have a smiling face .

5. conclude the discussion highlighting your strong points. 

6.It is better to call your GD members with names rather than friends so 
know their names. It helps u a lot. 


7. Don't see the observer seating besides you. 

8. Write the points which are discussed in the G.D .

Satyam Placement Papers | Satyam Interview Procedure | 
Satyam Aptitude Questions | Satyam Technical Questions | 
Satyam Interview Questions

9. wish all the members and introduce yourself and explain your points in 
starting.

10. Your eye contact never be diverted from your team members and 
especially speaking person. 

11.  speak louder .

12. Don't point out anyone with finger. 

11. Use these phrases as many as u can......depend on the discussion 
      "Friends ...Let's us give equal opportunity to all" 
        "I will say one point" 

Take an advantage of shy person to share his views.... saying  

        "Friend! You can also share your views" its adds points to both of 
them (if he/she speaks)  
                
If any person telling his views without listening others or without giving 
chance to others than use can stop him simple saying 

        **  "please give chance to other people also" 

As our discussion went well, as result 6 members selected in my group but 
in some groups who created bad atmosphere ....only 1 or 2 selected .

Speak confidently and fluently.

follow  the above TIPS you are surely clear your GD  why because Gd is 
major elimination round in Satyam be careful.

Satyam Placement Papers | Satyam Interview Procedure | 
Satyam Aptitude Questions | Satyam Technical Questions | 
Satyam Interview Questions
 
  
Last round is Technical and  HR interview 

It's easy .
Whatever is in in your resume (HR FORM) from that only questions arise.  
careful in preparing resume and be confident. 

Hope the best and try for best.

Yours
Sasi

HSBC written test  consists  of....

HSBC Placement Papers | HSBC Interview Procedure | 
HSBC  Aptitude Questions | HSBC Technical Questions 
| HSBCInterview Questions


SECTION 1: English ( Prepositions, 1 reading comprehension and some 
finding error in sentences..)

SECTION 2: Aptitude ( Venn diagram problems, blood relations, Mixers and 
alegations from RS agarwal quant book...etc..)

SECTION 3: JAVA ------40 questions ( They  asked about CORE JAVA and Total 
AWT Package.....)

Thats all about written test....

HSBC Placement Papers | HSBC Interview Procedure | 
HSBC  Aptitude Questions | HSBC Technical Questions 
| HSBCInterview Questions


NOTE: Ther is a negative marking in this test...

As  I did not clear my written test I dont know much about technical 
interview.

but my freinds said

They are asking about Thread concepts in java and multi threading and some 
basic definitions in CORE JAVA.

and it's better to have a look on advance java too.


ok.  ALL THE BEST FOR your color ful future...

HSBC Placement Papers | HSBC Interview Procedure | 
HSBC  Aptitude Questions | HSBC Technical Questions 
| HSBCInterview Questions


REGARDS

may i know that what is the pattern of the aptitude test of 
this company........because it is going to visit our campus 
very soon .....so i want to know about the apti. paper and 
technical question of this company so that i can prepare 
better to gat the job in this company......

may i know that what is the pattern of the aptitude test of 
this company.

I gave my Infosys exam on Jan 17, 07. It was a computer based online test.

Infosys Placement Papers | Infosys Interview Procedure | 
infosys Aptitude Questions | Infosys Technical Questions | 
Infosys Interview Questions

PATTERN :

Logical Reasoning - 30Questions- 40mins
Test in English -40 Questions- 35mins

 

Logical Reasoning::

1 Puzzle problem (5 sub questions) -  Refer (Verbal Reasoning-RS agarwal 
puzzle test chapter)

1 question on cube (5 sub questions) -  Refer(Non-Verbal Reasoning-RS 
agarwal cubes and dice chapter)

1 question on Data Interpretation  (5 sub questions) -  (Quantitative 
Aptitude- RS Agarwal Data Interpretation section II)

5 questions on Data Sufficiency -  Math xpressions followed by 2 
conditions and they ask u which conditions are required 1 or 2 or both or 
none

5 questions on Series - Refer(Non-Verbal Reasoning-RS agarwal series 
chapter 1)

5 questions on syllogism - (Verbal reasoning - II part logical reasoning 
there are 9 rules 2 come to a conclusion from given sentences, read all of 
them, also in syllogism  given 6 sentences out of which we should choose 
the best meaningful 3, .


Also, Blood relations and number, time, sequence chapters in Rs agarwal 
verbal reasoning are important though we didn't get many questions.
 
Verbal:: Very easy if u have good grammar you will get through easily, 
reading comprehensions were  ok but try 2 solve at the end.

Infosys Placement Papers | Infosys Interview Procedure | 
infosys Aptitude Questions | Infosys Technical Questions | 
Infosys Interview Questions


 
INTERVIEW:


There were 2 persons aged both 25yrs, male and female.... absolutely cool 
interview I had it was like talking  with 2 friends.

Questions  asked were 

Tell about urself ?
Why software?(Because I was from EEE). 
What are your future plans?
why infosys?
Any 3 recent IT developments? 
an easy puzzle?
what did u do after engineering? 
what are your hobbies? 
And if i had any ques for them. 


Infosys Placement Papers | Infosys Interview Procedure | 
infosys Aptitude Questions | Infosys Technical Questions | 
Infosys Interview Questions

I askd when could I xpect a mail from their side, they told me we'll let u 
know in 3 weeks.

Waiting for the email from their side guys.

Bye,
Suman.

hai. can anyone tell the current pattern in infosys ... pls 
send some of the latest papers as i m in need of it..wats 
the expected cutoff?

Curretn and correct pattern of infosys interview

Aptitude
  this section has aptitude questions and verbal and 
logical section
technical
  some technical questions will be asked by the interviewer
Human resource 
 This is face to face interview , one or more interviwere 
will be ther for taking hr

Aptitude
  this section has aptitude questions and verbal and 
logical section
        
Technical
  some technical questions will be asked by the interviewer
  It is not a fully technical session 
  Sometimes  they have questions about your personal thing..
  Aptitude,self confidence

Human resource 
 This is face to face interview , one or more interviewer 
 will be there for taking hr
 This is simple interviewer,see like  your friends
 
        (Big Thing,you do your self confidence)

HP has 3 rounds 

1.Preliminary  -consists of 4 sections namely english,reasoning,aptitude 
and   comprehension.
 
English-just preliminary consisting of articles,jumbled up sentences, 
antonyms & synonyms etc.
 
HP Placement Papers | HP Interview Procedure | 
HP  Aptitude Questions | HP  Technical Questions | 
HP  Interview Questions


Reasoning round :  this is the part which most students found to be the 
tough eventhough half of the questions were very easy.


The ones which were tough are venn diagram puzzles,the type of problems 
were one has to decide if the person is to be selected, rejected or 
referred clock puzzles, cube(which part is painted etc).
 
Aptitude round :  just prelimanaries  involving time & distance, binary 
numbers, clocks, simple but lenghy mathematical calculations.

HP Placement Papers | HP Interview Procedure | 
HP  Aptitude Questions | HP  Technical Questions | 
HP  Interview Questions
 
Conprehension :  Apassage from MIcroprocesor was given from which 
conclusion was to be drawn.It was a tough one. 

 
2. Technical Interview  :  Just simple questions involving  C,C++,DBMS
(must),SQL, software engg,d.s.
 
3. HR :  Lengthy  (for me it was approximately 40 min) but quite cordial.


Just general questions like family background,hobbies from biodata,last 
movie seen it's story,last book which you  read and so on.
 
The major eliminating round was the preliminary section.

HP Placement Papers | HP Interview Procedure | 
HP  Aptitude Questions | HP  Technical Questions | 
HP  Interview Questions

I got placed in Accenture from the campus held at vidyavihar on 27th nov. 
There were around 500 students appeared for the aptitude test and 200 got 
shortlisted.

Accenture Placement Papers | Accenture Interview Procedure | 
Accenture  Aptitude Questions | Accenture Technical Questions 
| Accenture Interview Questions


Here's the pattern

1. APTITUDE TEST

There were 3 sections 1.verbal ability 2.aptitude(maths) 3.analytical 
ability(puzzles). 

The test was quiet easy. don't do just quantitative aptitude.  brush up on 
verbal and analytical also .

GD was ok. They see you speak something and speak confidently.

Our topic was 'Money in turn will give you academics and academics in turn 
will give you a bright career.

Accenture Placement Papers | Accenture Interview Procedure | 
Accenture  Aptitude Questions | Accenture Technical Questions 
| Accenture Interview Questions



HR In HR  round they ask the usual questions but many were eliminated in 
this round. so the key is to be confident and gather as much information 
as possible about Accenture.

To some people some technical questions were also asked in HR and many got 
nervous. I think they just wanted to see how u react. so don't be nervous 
if they start asking you technical questions in HR.

4. Technical  :  It was also an elimination round. Some got eliminated in 
this round but it depedns on the interviewer also. To some students very 
tricky questions were asked. they asked mostly about your project and if 
you start well then after that they ask you very simple questions.

They also ask about C, C++,Software engg(Testing).  Try to score high in 
Aptitude test. If your score is high and if you have cleared the GD then 
by Technical Interview is just a formality. so All The Best to all of u! 
May all of you get good placements.

Accenture Placement Papers | Accenture Interview Procedure | 
Accenture  Aptitude Questions | Accenture Technical Questions 
| Accenture Interview Questions

           answers for the above placement papers

LG Placement Papers | LG Interview Procedure | 
LG Aptitude Questions | LG Technical Questions 
|LG Interview Questions.




1.
main()
{
int i;
printf("%d", &i)+1;
scanf("%d", i)-1;
}

a. Runtime error. b. Runtime error. Access violation. c. Compile error. 
Illegal syntax d. None of the above

2. main(int argc, char *argv[])
{
(main && argc) ? main(argc-1, NULL) : return 0;
}


a. Runtime error. b. Compile error. Illegal syntax c. Gets into Infinite 
loop d. None of the above

3. main()
{
int i;
float *pf;
pf = (float *)&i;
*pf = 100.00;
printf("%d", i);
}


a. Runtime error. b. 100 c. Some Integer not 100 d. None of the above

4. main()
{
int i = 0xff;
printf("%d", i<<2);
}

 a. 4 b. 512 c. 1020 d. 1024

5. #define SQR(x) x * x
main()
{
printf("%d", 225/SQR(15));
}

a. 1 b. 225 c. 15 d. none of the above

6. union u
{
struct st
{
int i : 4;
int j : 4;
int k : 4;
int l;
}st;
int i;
}u;
main()
{ u.i = 100;
printf("%d, %d, %d",u.i, u.st.i, u.st.l);
}


 a. 4, 4, 0 b. 0, 0, 0 c. 100, 4, 0 d. 40, 4, 0

7. union u
{ union u
{ int i; int j;
}a[10];
int b[10];
}u;
main()
{
printf("%d", sizeof(u));
printf("%d", sizeof(u.a));
printf("%d", sizeof(u.a[0].i));
}


a. 4, 4, 0 b. 0, 0, 0 c. 100, 4, 0 d. 40, 4, 0

LG Placement Papers | LG Interview Procedure | 
LG Aptitude Questions | LG Technical Questions 
|LG Interview Questions.




8. main()
{
int (*functable[2])(char *format, ...) ={ printf, scanf};
int i = 100; (*functable[0])("%d", i);
(*functable[1])("%d", i);
(*functable[1])("%d", i);
(*functable[0])("%d", &i); }

}


a. 100, Runtime error. b. 100, Random number, Random number, Random 
number. c. Compile error d. 100, Random number

9. main()
{ int i, j, *p; i = 25;
j = 100; p = &i; /* Address of i is assigned to pointer p */
printf("%f", i/(*p)); /* i is divided by pointer p */
}


a. Runtime error. b. 1.00000 c. Compile error d. 0.00000

10. main()
{ int i, j;
scanf("%d %d"+scanf("%d %d", &i, &j));
printf("%d %d", i, j);
}


a. Runtime error. b. 0, 0 c. Compile error d. the first two values entered 
by the user

11. main()
{
char *p = "hello world";
p[0] = 'H';
printf("%s", p);
}

a. Runtime error. b. "Hello world" c. Compile error d. "hello world"

12. main()
{ char * strA;
char * strB = "I am OK";
memcpy( strA, strB, 6);
}

a. Runtime error. b. "I am OK" c. Compile error d. "I am O"

13. How will you print % character?

a. printf("%") b. printf("%") c. printf("%%") d. printf("%%")

14. const int perplexed = 2;
#define perplexed 3
main()
{
#ifdef perplexed
#undef perplexed
#define perplexed 4
#endif
printf("%d",perplexed);
}

a. 0 b. 2 c. 4 d. none of the above

15. struct Foo
{
char *pName;
};
main()
{ struct Foo *obj = malloc(sizeof(struct Foo));
strcpy(obj->pName,"Your Name");
printf("%s", obj->pName); }

a. "Your Name" b. compile error c. "Name" d. Runtime error

16. struct Foo
{ char *pName;
char *pAddress; };
main() { struct Foo *obj = malloc(sizeof(struct Foo));
obj->pName = malloc(100);
obj->pAddress = malloc(100);
strcpy(obj->pName,"Your Name");
strcpy(obj->pAddress, "Your Address");
free(obj); printf("%s", obj->pName);
printf("%s", obj->pAddress); }

a. "Your Name", "Your Address" b. "Your Address", "Your Address" c. "Your 
Name" "Your Name" d. None of the above

17. main()
{ char *a = "Hello "; char *b = "World";
printf("%s", stract(a,b));
}


a. "Hello" b. "Hello World" c. "HelloWorld" d. None of the above

18. main()
{ char *a = "Hello ";
char *b = "World";
printf("%s", strcpy(a,b));
}


a. "Hello" b. "Hello World" c. "HelloWorld" d. None of the above

19. void func1
(int (*a)[10])
{ printf("Ok it works");
}
void func2(int a[][10])
{ printf("Will this work?");
}
main()
{ int a[10][10];
func1(a);
func2(a); } 


a. "Ok it works" b. "Will this work?" c. "Ok it works Will this work?" d. 
None of the above .

20. main()
{
printf("%d, %d", sizeof('c'), sizeof(100));
}

LG Placement Papers | LG Interview Procedure | 
LG Aptitude Questions | LG Technical Questions 
|LG Interview Questions.





a. 2, 2 b. 2, 100 c. 4, 100 d. 4, 4

20. main()
{ int i = 100;
printf("%d", sizeof(sizeof(i)));
}


a. 2 b. 100 c. 4 d. none of the above

21. main()
{ int c = 5;
printf("%d", mainc);
}


a. 1 b. 5 c. 0 d. none of the above

22. main()
{ char c; int i = 456; c = i;
printf("%d", c);
}


a. 456 b. -456 c. random number d. none of the above

23. void main ()
{ int x = 10;
printf ("x = %d, y = %d", x,--x++);
}


a. 10, 10 b. 10, 9 c. 10, 11 d. none of the above

24 main()
{ int i =10, j = 20;
printf("%d, %d ", j-- , --i);
printf("%d, %d ", j++ , ++i); }


a. 20, 10, 20, 10 b. 20, 9, 20, 10 c. 20, 9, 19, 10 d. 19, 9, 20, 10

25. main()
{ int x=5;
for(;x==0;x--)
{ printf("x=%d", x--);
}
}


a. 4, 3, 2, 1, 0 b. 1, 2, 3, 4, 5 c. 0, 1, 2, 3, 4 d. none of the above

26. main()
{ int x=5; for(;x!=0;x--)
{ printf("x=%d ", x--);
} }


a. 5, 4, 3, 2,1 b. 4, 3, 2, 1, 0 c. 5, 3, 1 d. none of the above

27. main()
{ int x=5;
{ printf("x=%d", x--);
}
}

LG Placement Papers | LG Interview Procedure | 
LG Aptitude Questions | LG Technical Questions 
|LG Interview Questions.





a. 5, 3, 1 b. 5, 2, 1, c. 5, 3, 1, -1, 3 d. -3, -1, 1, 3, 5

28. main()
{ unsigned int bit=256;
printf("%d", bit); }
{ unsigned int bit=512;
printf(%d", bit); } }


a. 256, 256 b. 512, 512 c. 256, 512 d. Compile error

29 main()
{ int i; for(i=0;i<5;i++)
{ printf("%d ", 1L << i);
} }


a. 5, 4, 3, 2, 1 b. 0, 1, 2, 3, 4 c. 0, 1, 2, 4, 8 d. 1, 2, 4, 8, 16

30. main()
{ signed int bit=512, i=5;
for(;i;i--)
{ printf("%d ", bit = (bit >> (i - (i -1)))); } }


a.512, 256, 128, 64, 32 b. 256, 128, 64, 32, 16 c. 128, 64, 32, 16, 8 d. 
64, 32, 16, 8, 4

31. main()
{ signed int bit=512, i=5;
for(;i;i--)
{ printf("%d ", bit >> (i - (i -1))); }
}


a. 512, 256, 0, 0, 0 b. 256, 256, 0, 0, 0 c. 512, 512, 512, 512, 512 d. 
256, 256, 256, 256, 256

32. main() {
if (!(1&&0)) { printf("OK I am done.");
}
else { printf("OK I am gone.");
} }


a. OK I am done b. OK I am gone c. compile error d. none of the above

33. main()
{
if ((10) && (01))
{ printf("OK I am done.");
}
else
{ printf("OK I am gone.");



} } a. OK I am done b. OK I am gone c. compile error d. none of the above

34. main()
{ signed int bit=512, mBit;
{ mBit = ~bit; bit = bit & ~bit ;
printf("%d %d", bit, mBit);
} }


a. 0, 0 b. 0, 513 c. 512, 0 d. 0, -513 


LG Placement Papers | LG Interview Procedure | 
LG Aptitude Questions | LG Technical Questions 
|LG Interview Questions.

Iam happy to say that i attended the test and got selected for Siemens.

25 questions Technical  and 25 questions Quantitative. 0.25 negative 
marking . cut off is 8 and 12 respectively .

Time limit 35 minutes.

SIEMENS Placement Papers | SIEMENS Interview Procedure | 
SIEMENS Aptitude Questions | SIEMENS TechniSIEMENSl 
Questions | SIEMENS Interview Questions



Round 1 : Technical 

1. A C++ prgm is given and find the output (a static function calls a 
nonstatic function).

2. what is normalization ? (4 choice definitions are given which are very 
similar) .

3. In UNIX how to delete a file? 

Ans is  >> 'rm' command .

4 In UNIX how to concatenate or see the details of a file ? 

Ans is 'cat>>filename' cmd .

5. questions  related to editors in UNIX  i e vi editor'?

6. in java to ensure that no threads are being updated simultaneously 
monitors are used and also synchronised keyword is used.

7. same question related to oracle windows application.

8. what is primary key?

9. oracle is a rdbms ?

SIEMENS Placement Papers | SIEMENS Interview Procedure | 
SIEMENS Aptitude Questions | SIEMENS TechniSIEMENSl 
Questions | SIEMENS Interview Questions



Quantitaive section :

1. question related to time and work.
2. question related to typing papers (related to time n work) ans is 75 or 
same value in 70s.
3. question related to percentage .
4. question related to profit and loss.
5. question related to simple interest.
6. question related to time, speed and distance where distance is miles 
per hr and time is in minutes.
7. complete the series
           1,4,9,16,? ans is 25
            two more such series
8. encrypted word(each alphabet replaced by its next)
          two of such ones
9. 4+x^2= x^3? whats x? ans x=2

Start quantitaive from behind as its easy and one can finish it fast.

Round-2 :

Technical and  HR :

1. what is normalization?
2. what are the types of normal forms ?
3. explain all projects done.

SIEMENS Placement Papers | SIEMENS Interview Procedure | 
SIEMENS Aptitude Questions | SIEMENS TechniSIEMENSl 
Questions | SIEMENS Interview Questions





Round-3 : Technical cum HR


1. if you delete an entry from table what can you do?

ans : rollback if delete is used and cant rollback if truncate is used

they asked me whether i know the concept of recovery but i didnt know as 
it was not there in syllabus .

2. explain the difference between delete and truncate ?

ans: delete is data definition language and truncate is data manipulation 
language. with truncate the structure of database is lost .

3. what is a foreign key or what is  the referential intergrity constraint?

4. In MS Access what is  created first the table or database? 
Ans: its database


SIEMENS Placement Papers | SIEMENS Interview Procedure | 
SIEMENS Aptitude Questions | SIEMENS TechniSIEMENSl 
Questions | SIEMENS Interview Questions




Round-4 : HR

1. favourite subject in college?
 As I said datawarehousing 

2.what is the  difference between database and datawarehousing?

Finally I was selected and placed in the SAP dept.
Hope all this helps.

Hi all my name is Harish (Babloo). I am  a silent member of allinterview.

I Had written my written test on 7th October in TCS at Hyderabad.  I 
cleared my written test.

TCS Placement Papers | TCS Interview Procedure | 
TCS Aptitude Questions | TCS Technical Questions | 
TCS Interview Questions


My technical interview held on 26 November in TCS at Hyderabad.

The interviewer is lady and asked 
first query is "tell me about urself?"

It was very cool and they mainly concentrated on project.

They asked only fundamentals  presented in the resume.

I Mentioned my BCA graduate project in the resume.

They asked me number of queries on that project.

They asked MCA project also.

I Explained neatly and also flow of the project on the paper.

TCS Placement Papers | TCS Interview Procedure | 
TCS Aptitude Questions | TCS Technical Questions | 
TCS Interview Questions



They asked some quries on Oracle.

And some other fundamental concepts of

Data Structure, software engineering with the concepts  like testing, 
types of testing, life cycle and which model you have used and why?

I Was through to technical interview and asked to attend the MR & HR 
rounds on 30 November. 

TCS Placement Papers | TCS Interview Procedure | 
TCS Aptitude Questions | TCS Technical Questions | 
TCS Interview Questions




In that also they asked tell me abt urself?.

What is the role you played in the final degree project?

I said about designer.
 
They asked to draw any two screens along with the fields?

I Drew well and also quoted some sql queries.

I am well at Oracle and asked abt join operations, etc.


Finally they declared the result.

TCS Placement Papers | TCS Interview Procedure | 
TCS Aptitude Questions | TCS Technical Questions | 
TCS Interview Questions



I was very happy  that I was through to HR round.

My HR round was around 6pm evening on that day itself. Hr was lady.

She asked me to tell abt myself?

And about the bond  in the TCS.

That's all my experience in TCS.

TCS Placement Papers | TCS Interview Procedure | 
TCS Aptitude Questions | TCS Technical Questions | 
TCS Interview Questions

L&T Infotech Placement Papers | L&T Infotech  Interview Procedure | 
L&T Infotech Aptitude Questions | L&T Infotech Technical Questions | 
L&T Infotech Interview Questions


Iam Srinivas of Sri Venkateswara Engg. College, Chittoor.

I recently attended L&T infotech campus recruitment held at Sri 
Vidyanekethan Engg. College, Tirupathi on 9th -10th  of September
(2006) .

Eligibilities:

Should have consistently scored atleast 60% in 10th, intermediate
and 
BTECH all sems.

Should not have any history of fails in any class or semester.

Process of Selection:

1) Written test on quantitative aptitude, reasoning and English
each section consists of 30 questions => total 90 questions in 90
minutes.
No negative marks 90 marks.

There is sectional cutoff so you need to score in all sections
properly
The sectional cutoff was around 14-16.

Note: there are 3 sets of papers almost same standard.
 
2) Technical interview     may or may not have group discussion
3) HR interview   





        

Written Test:

Aptitude:

1. In a kilometer race between A and B, A beats B by 9 seconds or 36 
meter. Then what is the time taken by B to finish the race.

Sol:  When A has just completed the race it means B is behind by
36mts or  
completed 966mts. And when a has taken T seconds to complete the
race B 
needs another 9 secs to complete the race; that means B runs
another 36mts 
in 4sec so his speed is 36/9 = 4mts/sec

So travels 1000mts or 1km in 1000/(36/9)=250secs(time=dist/speed)
So A completes race in 250-9sec=241secs .

2. If 4apples and 6oranges cost 13/- and 2apples & 4oranges cost
7/- find 
cost of one apple and one orange.

Sol: subtract 2nd eqn from 1st then we have 2a-2o=6 =>1apple and
1orange 
cost 3/-

3. If a person travels for P km in t hrs and then increases his
speed by x 
km/hr find his new speed.

a) (p/t)+x    b) pt+x         c)p/x+t     d)pt/x   ans:a

4,5,6 questons based on statistics from a bar graph.

7. If a kite is at a height of 50mts from ground and the angle of 
inclination from a point on ground is 60degree then find length
of the 
kite sting.

Sol: based on trigonometry heights and distances: sin60=height of 
kite/length of string(altitude/hypotenuse) .

ans:100/(root of 3).

L&T Infotech Placement Papers | L&T Infotech  Interview Procedure | 
L&T Infotech Aptitude Questions | L&T Infotech Technical Questions | 
L&T Infotech Interview Questions




8. If avg. of 6 nos. is 8 and later 2 new nos. are added such
that the avg 
of the present 8 nos is 6 then what is the avg of  newly added
two nos.


Sol:

 avg=total sum of values/ no of objects or observation
?    8 =total sum of values of 6 nos /6
?    total sum of values of 6 nos=6*8=48
now when 2 new nos are added applying same formula 6= total sum
of values 
of 8 nos/8
?    total sum of values of 8 nos=48 so the value has not changed
which 
means the sum of added 2 nos is zero so avg=zero/2=zero (ans)
 
9. What % of 4/7 is 4/5?

Sol: {(4/5)/(4/7)}*100= ans =140%

10. By what % should a person sell an article so as to gain a
profit of 
24% even after giving a discount of 10 % ?

Sol)

the easiest way to solve such problems is by assuming the cost
price as 
100rs 
        So to get a profit of 24% means to sell at 100+24=124/-
        So suppose he sold it at 10% discount initially he sells
at 90rs  
so ther is a difference of 34/- 

L&T Infotech Placement Papers | L&T Infotech  Interview Procedure | 
L&T Infotech Aptitude Questions | L&T Infotech Technical Questions | 
L&T Infotech Interview Questions





11. One problem on Arithematic progression

12. One on mean

13. Matrix addition:
      If    1  2  3          1  1  1             0  1  2    
            5  7  9    =    3  4  7      +     2  3  2   
            2  3  4          1   1  1           1  2    ?       
then what is the value of ?  
  
ans: 4-1=3

14. Find the determinant of a 3*3 matrix?  

15. A red light glows every 10sec, yellow every 15sec and red
every 18sec. 
find the number of times all three glow together from 8:00AM to
9:00AM 
(including both times)

Sol :   LCM of 10,15,18 = 90 
So every 90 seconds all three glow together so in one hour there
are 3600 
secs 
So 3600/90=40 times but answer is 41 because they glow at 0th
second that 
is at 8 Am since both times are included.

16. If a man travels at 30km/hr is behind a car by 40mtrs. In
20sec if he 
leads the car by 20mts then what is speed of car?

17. If age of a person is x and his mothers age is 34. then after
how many 
years will the mothers age be twice of the son? 

18. One more age problem

19. If a person takes 5 days and 8 hrs   to dig a trench ; then
how many 
persons will dig 3 trenches in 1 day (with each day of  8 hrs work)

20,21,22 questions based on arthematic calculation to check ur
speed in 
calculating.

One question based on allegation and mixture  go for error and
trial method

I don't remember other 7 questions




Verbal test:

30 questions 

Meanings 3 questions:

Faux Pas : means a blunder (spelled as fau pa)
 Don't remember other two 


Arranging sentences in order(3 or 4 questions)

Finding errors in a sentence(3 Qs)

Reading passage (5 questions ): easy to score atleast 4 marks out
of 5 by 
reading questions and coming to passage to search answer also
less time 
consuming

Also anologies

Reasoning

Based on venn diagram 3 questions 




1) Which diagram best represents musician, violinist and
instrumentalist?
 
Ans: three concentric circles  the outermost circle being
musician the 
inner circle instrumentalist and the innermost being violinist.
Because every violinist a musician and instrumentalist but not the 
viceversa.
Every instrumentalist is a musician but not the viceversa

2) polygon, quadrilateral and rhombus ?

Ans : the same as above answer rhombus is the innermost then the 
quadrilateral and outside is the polygon .

Explaination: a polygon is a 3 or more close sided figure so even a 
triangle and pentagon are polygons so is a quadrialateral which
is a 4 
sided fig and quad includes rombus, square, rectangle, kite,
trapezium etc
Not able to remember other one 

Three questions on seating arrangement .

3 questions based on giving 3 figures and then we are required to
find the 
4th fig which comes next in the logical sequence.


Other questions are also not that tough.

L&T Infotech Placement Papers | L&T Infotech  Interview Procedure | 
L&T Infotech Aptitude Questions | L&T Infotech Technical Questions | 
L&T Infotech Interview Questions





Technical Interview questions:

As I belong to ECE they asked on 
define modulation and types of modulation ?
Types of antenna and where is antenna placed in an aeroplane?

What is the antenna used in home for doordarshan chaneel ans is 
broad 
side array antenna ?
Data bus size of 8086 &8085 microprocessors ?
Ram size of 8085&86 ?
My favourite subjects I was also asked tell me about urself  ?







On C:

How to read a string ?
what aboutlinked list ?
Also a puzzle was given to me .

q) if ur given 6 balls of all equal color and identity and 5 are 
equalweight find the unequal heavier  ball. you are  also given a
common 
weighing balance ? find the minimum iterations required.


Ans:

first divide the balls into two grops of 3 each and weigh them
then we get 
the heavier side .

Next take two from the heavier section and weigh them with one on
each 
side if they are equal then the 3rd one is the heaviest.
So 2 iterations are enough.

HR:


Asked on hobbies if ur hobby is collecting stamps then remember
it is 
called as philately .

One who is Collecting coins is numismatist.

Be well prepared on questions 4m hobbies 

What is ur father and why u didn't go to that field ? 


Try making a good impression. Remember "well begun is half done" 

Microsoft Placement Papers | Microsoft Interview Procedure | 
Microsoft Aptitude Questions | Microsoft Technical Questions | 
Microsoft Interview Questions


1 .written test round 


It is of 2 parts 

1. Technical Round basically  Questions from  C, C++, Java)
 
You should be confident in oops concepts.

2. Aptitude  Round 

General practice questions  from R.s agarwal .

Each section will have its own cut-off .

Microsoft Placement Papers | Microsoft Interview Procedure | 
Microsoft Aptitude Questions | Microsoft Technical Questions | 
Microsoft Interview Questions

 
2.G.D Round .

they will give you a topic . The group may be around 8 or 6 depending on 
the crowd .        
  
say best points when your turn comes . say some thing which is new there 
at that time . Then you can definetely go through it .

Microsoft Placement Papers | Microsoft Interview Procedure | 
Microsoft Aptitude Questions | Microsoft Technical Questions | 
Microsoft Interview Questions

Keep smiling .

Campus placements on 5th Dec at Indhur college Siddipet .

Semantic Space Placement Papers | Semantic Space Interview Procedure | 
Semantic Space Aptitude Questions | Semantic Space Technical Questions | 
Semantic Space Interview Questions


Written pattern: online exam was  held sectionwise. 

Total 3 Sections are there.

1. Aptitude 25 questions  in  30mins .

2. Verbal 20 questions  in 10 mins - very easy  like synonyms , antonyms 
tenses etc .

3. Technical 20 questions in  20 mins - C mainly (easy)

GD on same  day only.

Semantic Space Placement Papers | Semantic Space Interview Procedure | 
Semantic Space Aptitude Questions | Semantic Space Technical Questions | 
Semantic Space Interview Questions




Our topic in Technical GD are

1. OOPS and JAVA
2. DBMS
3. OS
4. c versus java
5. SE

we discussed all these topics for about 30-35 mins .

8 of 10 ppl were selected among us. Our GD organiser was very 
friendly ,helped us a lot . 

Semantic Space Placement Papers | Semantic Space Interview Procedure | 
Semantic Space Aptitude Questions | Semantic Space Technical Questions | 
Semantic Space Interview Questions




3 days later:

I got a call from them for interview 2 days later and informed that 
interview will be on 12th (dec) i.e 6 days after written and gd. 

Interview will be about 2-3 tech interview levels and  stressed on C, 
OOPS, DBMS, CN, OS, SE, DS concepts. 

Semantic Space Placement Papers | Semantic Space Interview Procedure | 
Semantic Space Aptitude Questions | Semantic Space Technical Questions | 
Semantic Space Interview Questions

tomorrow(25-05-2008) iam going to attend the exam,
HOw the exam will be there? 
where is the job location?
projects are only on java or dotnet?

Hi all do you know the pattern of Grapecity Placements ?

GrapeCity  Placement Papers | GrapeCity  Interview Procedure | 
GrapeCity  Aptitude Questions | GrapeCity  Technical Questions | 
GrapeCity  Interview Questions

The first round is an aptitude paper 30 questions in 30 minutes:

The paper consists questions  divided into 4 classes namely A, B, C and D.

The D level questions are the simplest and will fetch you only one mark 
while the A level questions are very lengthy and conceptual, however will 
fetch you the maximum number of marks i.e four.

The D level questions are very very simple, as simple as look and answer. 

example:

4 pictures are given and  by looking at them you have to answer which one 
is different from the rest of the 3.

GrapeCity  Placement Papers | GrapeCity  Interview Procedure | 
GrapeCity  Aptitude Questions | GrapeCity  Technical Questions | 
GrapeCity  Interview Questions


Another simple question of this type is the one in which there is a pool 
of figures such as pentagon, hexagon, rectangle and square and below this 
pool value of each figure is written. you have to calculate the value of 
the pool by counting the no of figures and replacing them with their 
values.


The C level questions are from R.S Agarwal, simple questions based on 
percentage, profit lose, time and work and number problems basically there 
to check your ability to deal with quantitative problems. 


The A and B level questions are based on Logical Reasoning where the Level 
B questions are simpler than the level A questions. You need to solve 
atleast 15 questions to seek your chances of getting to the next round.



2. The second round is an HR interview:

Its a general HR interview in which you  can expect simple HR questions 
based on your resume, some situational based questions like design a 
mobile phone for deaf and dumb, some basic technical questions.


GrapeCity  Placement Papers | GrapeCity  Interview Procedure | 
GrapeCity  Aptitude Questions | GrapeCity  Technical Questions | 
GrapeCity  Interview Questions


3. Third round is another HR/ Basic Technical Round:

You would be interview by a Japanese HR, they would judge your basic 
technical skills, discuss ur projects. I felt if this round was just to 
make sure that your profile matches the profile that you have been called 
for.


4. Fourth Round/ Core Technical round: 

This was a core technical round which revolved around all the technical 
stuff that u could possibly dream of. you could be asked to design a 
module and then implement it on the computer.  They may also ask  puzzles 
to check how logically strong you are.

GrapeCity  Placement Papers | GrapeCity  Interview Procedure | 
GrapeCity  Aptitude Questions | GrapeCity  Technical Questions | 
GrapeCity  Interview Questions


5. Fifth Round/ Technical + HR: 

The last round here is the technical / HR round. Here in the HR was an old 
japanese person who finally asks you any thing and everything of technical 
and HR, they won't be satisfied if you can make the program but they would 
be satisfied if you can make an optimized program. you don't have to be 
the master of the trade but one with very very good logical skills. They 
want you to do things quick and smart and that too in a compact manner. A 
simple program of ( if else ) in C can also be written through ( ?  : ), 
use the latter option because it makes the size of the program small and 
thats what they love.


Once you are through all the rounds you would be offered a package which 
can smartly be negotiated.

GrapeCity  Placement Papers | GrapeCity  Interview Procedure | 
GrapeCity  Aptitude Questions | GrapeCity  Technical Questions | 
GrapeCity  Interview Questions

I am Joseph  and I have attended Interview on Dec 20 in Bangalore. This is 
my interview experience. The Interview was cool. Two persons interviewed 
me. It was for about 20 minutes. 

Infosys Placement Papers | Infosys Interview Procedure | 
infosys Aptitude Questions | Infosys Technical Questions | 
Infosys Interview Questions


Here are the questions

1) Tell me about yourself which is not there in your resume ?
2) What are your strengths ?
3) Tell me briefly about your project ?
4) How do you update yourself on current affairs ?
5) How do you like to make decisions when you are in a team ?
6) Puzzles ?

Infosys Placement Papers | Infosys Interview Procedure | 
infosys Aptitude Questions | Infosys Technical Questions | 
Infosys Interview Questions



compute 100 from digits 1 to 9 by using them in the same order not more 
than once.

7) Puzzle-

Place 4 trees equidistantly from each other.

Ans)in the shape of pyramid.

Just be confident and active. Be honest and don't ell lies unnecessarily. 
confirm what is there in your resume as they ask questions only from it.

All the best guys. 

Infosys Placement Papers | Infosys Interview Procedure | 
infosys Aptitude Questions | Infosys Technical Questions | 
Infosys Interview Questions