| Other CCDA Interview Questions |
| |
| Question | Asked @ | Answers |
| |
| What protocol advertises Netware services to network
clients? (Type acronym). | | 1 |
| Which two statements correctly identify considerations to
take into account when deciding on campus QoS Design elements ? | Pari-Networks | 1 |
| Which condition does not create LAN media problems?
A. Protocol doesn?t scale well
B. Long wait for the token
C. Excessive collisions
D. Too many devices | | 1 |
| 6. Which of these statements best describes VPLS ?
| Pari-Networks | 1 |
| What task do you complete to identify organizational
objectives that will reflect your design?
A. Business Objectives
B. Scheduling requirements
C. Vacation time
D. Meetings | | 2 |
| What is the technique used by a router that can
automatically initiate and close a circuit-switched session?
A. PLP
B. LAPP
C. ASN.1
D. DDR | | 1 |
| Which of the following three sets of IP addresses and subnet
masks are private IP addresses?
A. 10.0.0.0 255.0.0.0
B. 172.16.0.0 255.255.0.0
C. 172.16.0.0 255.240.0.0
D. 192.168.0.0 255.255.0.0 | | 1 |
| Which address is updated at each hop in the path in path
switching? | | 1 |
| What layer of the OSI reference model does TCP reside in?
A. Session
B. Transport
C. Network
D. Data-Link | | 1 |
| Which of the following are true regarding switched virtual
circuits (SVCs) and permanent virtual circuits (PVCs)?
Choose two.
A. SVCs and PVCs can use the same circuit.
B. PVCs are permanently established virtual circuits.
C. SVCs and PVCs terminate the circuit when data
transmission is complete.
D. SVCs are virtual circuits that are dynamically
established on demand and terminated when data transmission
is complete. | | 1 |
| The following are the four steps in establishing an X.25
virtual circuit. Place them in the correct order.
A. The PSE (Packet Switch Exchange) passes the packet to the
next remote DCE
B. The local DCE packet binder sends packet to the closest
PSE (Packet Switch Exchange)
C. The source DTE sends packet to the local DCE
D. The remote DCE examines the packet header of destination DTE | | 1 |
| Distance Vector and Link-State protocols converge more
quickly if:
A. there is router redundancy
B. there is router redistribution
C. the update interval is set to its maximum
D. the whole routing table is sent to announce changes | | 1 |
| With Centralized Routing, each node must determine and
maintain its routing information independently?
A. True
B. False | | 1 |
| What are two differences between 10BaseT and 100BaseT?
A. Speed
B. Frame format
C. Addressing
D. Network diameter | | 1 |
| Which two LAN switching features apply to store-and-forward
switches?
A. CRC
B. Frame length
C. Source address
D. Collision Windows | | 1 |
| Diagramming application information flow is important because:
A. it helps identify heavy traffic paths
B. it helps figure out why email gets from one place to another
C. it can tell you when to purchase a new router
D. it can tell you when to purchase a new switch | | 2 |
| Match the following routing techniques with the correct
descriptions:
A. Static Routing 1. Mandatory configuration
B. Dynamic Routing 2. No route updates
3. Can better tolerate failures
4. Sends update when topology changes
5. Path is determined by the router
7. Traffic is reduced | | 1 |
| how many switches can be cascaded | | 1 |
| Which tools help to characterize a network?
A. Sniffer
B. CiscoWorks 2000
C. Netsys
D. All of the above | | 1 |
| What device initiates a session in an X.25 network?
A. DTE
B. DCE
C. PSE
D. PAD | | 1 |
| |
| For more CCDA Interview Questions Click Here |
along with your userid / name. ThanQ
Site Map
