| Other CCNA Interview Questions |
| |
| Question | Asked @ | Answers |
| |
| As system administrator, you type "debug ipx sap" and
receive the following lines as part of the IOS response:
type 0x4, "HELLO2", 199.0002.0003.0006 (451), 2 hops
type 0x4, "HELLO1", 199.0002.0003.0008 (451), 2 hops
What does "0x4" signify?
A. That is a Get Nearest Server response.
B. That it is a General query.
C. That it is a General response.
D. That it is a Get Nearest Server request. | | 1 |
| Identify 3 IP routing protocols?
A.) RIP
B.) AURP
C.) OSPF
D.) IGRP
E.) ARP
F.) ICMP | | 2 |
| In order to enable RIP, which two tasks need to be
performed? (choose two)
A. Specify the routing protocol
B. Confound static RIP routes
C. Specify directly connected subnets
D. Specify directly connected networks | | 1 |
| Using the TCP/IP protocol suite a message is sent from host
A to a destination IP address on the same LAN. How does
host A determine the destination of MAC address?
A. It uses a proxy APP
B. It uses APP requests
C. It uses RARP requests
D. It uses a router lookup table | | 1 |
| Identify the command to display the configured IP routing
protocols?
A.) show protocols
B.) show protocols all
C.) show routing-protocols
D.) show ip protocols | | 2 |
| while trouble shooting a network conectivty prob a
technician observes that steady link light on the both work
stations nic and the switch port which the workstation is
conected.however when the ping comand is issuede from the
work station the out message is request time out
at which layer of osi model does the prob most likly exist
1 sessiom layer
protocol layer
datalink kayer
acess layer
network layer
application layer
i have ansered n/w layer but i am niot sure
i have also posted privous question
jitendera kumar sinha | | 3 |
| Which of the following can reply to a Novell Get Nearest Server
(GNS) request?
A.) Local Novell server
B.) Remote Novell Printer
C.) Cisco router
D.) Novell client | | 1 |
| IGRP uses flash updates, poison reverse updates, holddown
times, and split horizon. How often does it broadcast its
routing table updates?
A. 90 seconds
B. 10 seconds
C. 30 seconds
D. 45 seconds | | 1 |
| Identify 3 LAN technologies?
A.) FDDI
B.) HDLC
C.) HSSI
D.) X.25
E.) 802.3
F.) 802.5 | | 1 |
| Which IP address and wildcard mask would you use in your
ACL to block all the
hosts in the subnet 192.168.16.43/28? | Siemens | 2 |
| In which three situations is a hold down timer reset?
(Choose three)
A. when the hold down timer expires
B. when infinity is finally defined as some maximum number
C. when the router exchanges update summaries at area borders
D. when the router detects faulty LSPs propagating through
the internetwork
E. when another update is received indicating a new route
with a better metric
F. when another update is received indicaing the original
route to the network has been restored
G. when the router receives a processing task proportional
to the number of links in the internetwork | | 1 |
| What is the default CDP broadcast update rate for Cisco routers?
A.) 120 seconds
B.) 60 seconds
C.) 30 seconds
D.) 90 seconds | | 1 |
| You have an IP host address of 201.222.5.121 and a subnet
mask of 255.255.255.248. What is the broadcast address?
A. 201.222.5.127
B. 201.222.5.120
C. 201.222.5.121
D. 201.222.5.122 | | 1 |
| Which addresses are INCORRECTLY paired with their class?
A. 1 to 126, Class A
B. 128 to 191, Class A
C. 1 to 126, Class B
D. 128 to 191, Class B | | 3 |
| Which command will display Ethernet 0's IP address?
A.) display ip address e0
B.) show ip interface e0
C.) show address e0
D.) sh ip address e0
E.) show all | | 1 |
| Station A is transmitting data to station B, and expects an
acknowledgment after every 400 bytes. After transmitting
data for a
while, the two stations determine the line is reliable and
change to
expecting and acknowledgement every 600 bytes.
This is an example of (pick the best answer only):
A.) BECN
B.) Sliding Windows
C.) Poison Reverse
D.) Countdown timers
E.) Split Horizon
F.) Count to infinity | | 1 |
| Novell NetWare has an Ethernet frame type called Ethernet_SNAP.
What is the matching Cisco command line keyword for this
encapsulation
method?
A.) arpa
B.) sap
C.) snap
D.) gns
E.) dix
F.) novell-ether | | 1 |
| Which commands should you use to enable IGRP routing?
A. router igrp 100
Network 192.168.1.0
Network 10.0.0.0
B. router igrp 100
Network 192.168.2.0
Network 10.0.0.0
C. router igrp 100
Network 192.168.1.0 192 168.1.1
Network 10.2.0.0 10.2.1.1
D. router igrp 100
Network 192.168.1.0 255.255.255.0
Network 10.2.0.0 255.255.255.0 | | 2 |
| what is the subnet for the host ip address 172.16.210.0/22 | IBM | 4 |
| what is the difference between osi and tcp ? | | 6 |
| |
| For more CCNA Interview Questions Click Here |
along with your userid / name. ThanQ
Site Map
